|
Author
|
Topic: HPS's new 5.4L intake pics are up... peep delta
|
r3dn3ck
¯
Member # 3192
|
posted
 
 
Hey guys... you know that I'm a 5.4L head. Good news, pics are up of the new HPS 5.4 Hardball'R intake for 5.4L 2v in mustangs and f150's. Check em out:
I get mine in a few days. Once we have some dyno numbers and fitment info from the stangs the truck guys will be able to get into it pretty fast.
A couple design notes. Notice that the runner inlets are right at the roof of the plenum, and the plenum volume is looking like fully 6-7L or so. The runners have been chopped off at the roof to shorten them, the main entrance has been radius-ed a bit, runner entrances are way smoother, the runners are straighter. Looks like you can still port it if needed but it should be fine as cast after a port match to the heads to be used.
This will allow you to fit a 5.4L 2v under a stock hood on any 96-04 GT.
We should all be thanking bob for coming through.
--------------------
Good judgement comes from experience, experience comes from bad judgement. Via O'Connor
Posts: 202 | From: Bay Area | Registered: Aug 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
