T O P I C R E V I E W
|
50.stang
Member # 4009
|
posted
My check engine light came on after installing a new set of O2's on an 88 and it won't go off. When I hook my code reader up to the port, when its put to test mode, the light will just go dim and it wont spit out the codes. Has anyone ever ran into this problem and what was the fix.
PS even when I put the old o2's back on the light would not go off.
|
JohnB
Member # 969
|
posted
Did you make sure to hook up both connectors?
|
50.stang
Member # 4009
|
posted
Yea I did,
Ive ran hundreds of these tests and I never ran into this
|
JohnB
Member # 969
|
posted
Well, unfortunately it sounds like the PCM may be the problem. I have the exact same prob with my 01...and it's because of the PCM.
|
50.stang
Member # 4009
|
posted
thats not good, I was hoping that it wouldn't be the problem
|
silverLX
Member # 3207
|
posted
quote: Originally posted by 50.stang: thats not good, I was hoping that it wouldn't be the problem
better than not knowing the problem
|
JohnB
Member # 969
|
posted
Before you throw another PCM in...check your ENTIRE harness and make sure you don't have any breaks, shorts, bare wires, etc. There is a reason why it is going out.
|
50.stang
Member # 4009
|
posted
Ill do that, I dod change the O2 harness before this happened also, maybe that had something to do with it. But I did change it back and it didnt help.
|
Cobra5.0Jeep
Member # 1482
|
posted
quote: Originally posted by 50.stang: My check engine light came on after installing a new set of O2's on an 88 and it won't go off. When I hook my code reader up to the port, when its put to test mode, the light will just go dim and it wont spit out the codes. Has anyone ever ran into this problem and what was the fix.
PS even when I put the old o2's back on the light would not go off.
i had this problem turned out after spending alot of money on trying to fix the problem that my computer had failed. Atleast i got a rid of a lot of wiring problems
|
50.stang
Member # 4009
|
posted
could I use an auto computer with a 5 speed and what are the effects?
|
Cobra5.0Jeep
Member # 1482
|
posted
quote: Originally posted by 50.stang: could I use an auto computer with a 5 speed and what are the effects?
i don't think there would be a problem. [ January 31, 2006, 11:40 AM: Message edited by: Cobra5.0Jeep ]
|
Jdub07
Member # 2728
|
posted
This might sound dumb but how old is the battery in your scanner?
|
50.stang
Member # 4009
|
posted
I thought about the same thing, I changed the battery and the same result. I will use my friends scanner before I swap PCMs, just to see if its a scanner problem.
|