T O P I C R E V I E W
|
forced331
Member # 1270
|
posted
Anyone try them? Will they work ok for 560rwhp? I would run slicks but don't have the funds to beef up the rear end. thanks
|
FasterDamnit
Member # 442
|
posted
Uh- Come again? You don't want to run slicks for fear of breaking stuff but will run the MT's that are slicks w/ radial belts?
|
forced331
Member # 1270
|
posted
I figured having 17inch drag radials, won't hook as hard as the slicks or ET streets.
|
AJBlackGT
Member # 3936
|
posted
I've actually heard that the new MT drag radials hook better than the ET streets
|
forced331
Member # 1270
|
posted
What about in a 275/40/17? Less side wall!
|
HaulinAssMaro
Member # 541
|
posted
quote: Originally posted by AJBlackGT: I've actually heard that the new MT drag radials hook better than the ET streets
yes they do
|
AJBlackGT
Member # 3936
|
posted
quote: Originally posted by forced331: What about in a 275/40/17? Less side wall!
Yeah i know, they make a 17" ET street to you know
|
forced331
Member # 1270
|
posted
I've been checking those out too. thanks
|
jayl
Member # 185
|
posted
ive heard they hook up a 560+ rwhp car , full throttle in 2nd gear on the street......sounds like a good tire to me.....
|
FasterDamnit
Member # 442
|
posted
If you want to save suspesnion parts- get BFGoodrich or Nitto's. BFG's hook a bit better than Nitto's but don't last as long.
|
AJBlackGT
Member # 3936
|
posted
Also keep in mind you gotta heat the shit out of DRs if you want them to hook worth a crap...
|
forced331
Member # 1270
|
posted
For suspension, I have the Griggs severe duty torque arm and panhard brace and there lower control arms with a set of Tokico Illuminas adjustables. I have the M2300K Brake conversion. Can't find 15inch rims that would clear. I think I decided to go with the 26/11.5/17 ET streets. Which are actually 26.5inch overall diameter. I realized that I might run out of gear with the 275/40/17 drag radials which are 25.7 overall diameter. Thanks for all the info.
|
93lx342
Member # 1793
|
posted
i made 563 rwhp and 523 ft lbs and have 3.55 gears and could nail it in 2nd and it would hook up.i run the m/t drag radials.275/40/17.
|
forced331
Member # 1270
|
posted
93lx342-Thats good to know. Do you run a manual trans. Have you ran at the track with the drag radials, if so what rpm where you at through the traps and what was the 60ft? Thanks [ February 15, 2005, 09:15 PM: Message edited by: forced331 ]
|