T O P I C R E V I E W
|
rokcrln
Member # 2536
|
posted
I just picked up a coupe and I want to find out more about it. Like what was the production date, options it came with and any other info I can. The car seams to be un-touched and un-changed and has a few nice options like the rally pac gauge set and the full length center consule. Can any one run the # for me or point me in the right direction? Thanks Kevin [ August 12, 2004, 08:45 PM: Message edited by: rokcrln ]
|
wilit
Member # 3367
|
posted
The VIN won't tell you the info you're looking for. You need to read the door tag. That will have the interior codes, axle codes, paint codes, etc. FYI there is no code on the door tag nor the VIN to tell you whether or not your car is a GT. The GT package could be installed at either the factory or dealership.
|
rokcrln
Member # 2536
|
posted
Thanks I used to know that!
65A A 46 18E 73 1 6 thanks Kevin
|
wilit
Member # 3367
|
posted
65A = Coupe w/standard interior A = Raven Black exterior color 46 = White Vinyl w/black trim 18E = Built 18th of May 73 = Delivered to Salt Lake City 1 = 3.00:1 open rear end 6 = C4 automatic
Hope that helps.
|
rokcrln
Member # 2536
|
posted
Yes it does help thank you. Now is the 18 of may in 65 or 64. I was told it is a 64 1/2 not that it really matters. Thanks again Kevin
|
a50sn95
Member # 527
|
posted
FYI: http://www.sacramentoareamustang.org/decoder.html
|
wilit
Member # 3367
|
posted
There's really no such thing as a '64 1/2 Mustang. It's just how people denote the early production '65's from the later production '65's. The easiest way to figure out if it's a '65 or '64 1/2 is if it has a generator or alternator. '64 1/2's have the generator and '65's have an alternator. You can also tell by the engine code. '65's have the T, C, A, or K code engines. '64 1/2's have the V, D, & F engine codes.
|
rokcrln
Member # 2536
|
posted
Well here is a filthy engine shot! So it is a 64 1/2 then.
|
wilit
Member # 3367
|
posted
Looks like it's got an alternator. Unless someone converted it over, my guess is it's a '65. Doesn't really matter IMO, there's not much of a price difference between a '64 1/2 and a '65. Maybe a few hundred dollars or so. Judging by the door tag, no offense, but you don't really have anything out of the ordinary, so the '64 1/2 or '65 won't make a HUGE difference in price later on.
|
rokcrln
Member # 2536
|
posted
This is not a generator? I have never seen an alternator like it before!
|
JohnB
Member # 969
|
posted
If that is the original setup, it's a 64 1/2. That's a generator.
|
wilit
Member # 3367
|
posted
Whoops, my bad. That first picture was kind of hard to see. Yep, that's a generator.
|
nitrous_bob
Member # 77
|
posted
it's a 64 1/2 the date code would be 18S if were a '65 from a=jan through m=december is "early" '65 or 64 1/2 and the 65a means hard top w/ standard interior. there were 92,705 made total
if it had been a late '65 the date code would run from n through z accordingly. and there were 372,123 made total (also 65a)
for the engine code...it is in the vin yours probably something like 5f07f180xxx after the 5f07 is the engine code should be:
U=170 w/ 101 hp F=260 w/ 164 hp D=289 w/ 210 hp
if you don't have those engine codes...tell me but that should be right on...later...bob
|
rokcrln
Member # 2536
|
posted
Yes it is an F motor code 164hp 260V8. Thanks for the help. I just wanted to see what I had before deciding what to do with it. The motor has 3 low holes (100psi) and runs real ruff. I have a 90 5.0 I may use the long block from to get it up and going. Then put in new interior and paint and away she goes. I want to find a 65 or 66 fast back in need of total build up. Just don't want any rust or main body damage and the rest will be custom built. Here is the 64 1/2 I have now.
|
nitrous_bob
Member # 77
|
posted
looks pretty solid...you might not want to use the 302 block. might keep people from looking. try to stay 260. more people will be interested, you don't have to say it isn't original. mustangs did'nt have any codes to show engine to car to know that numbers match anyway , but it will still be original.
or use everything from the '90 and make it an efi car. just my 2 cents though. congrats on the 64 1/2
|