T O P I C R E V I E W
|
cees87drop
Member # 4066
|
posted
installed a performer intake manifold my self and now my car will not turn on. Any one have any ideas how i fu[K UP
|
mtbaughs
Member # 4052
|
posted
turn on as in no electrical power or the car will not start? Did you drop the distributor in correctly?
|
cees87drop
Member # 4066
|
posted
quote: -------------------------------------------------------------------------------- turn on as in no electrical power or the car will not start? Did you drop the distributor in correctly
radio and window work. the car just will not start. i am pretty sure i put the distributor in correct, just make sure that little mark match up right?
|
mtbaughs
Member # 4052
|
posted
Well you can get the distributor back in the exact position if you marked it on the bottom and also on the rotor and also if the motor position was not changed during the swap. If you want to correctly do it bring the motor to top dead center for cylinder #1. To do this remove the #1 spark plug and turn the motor over till you feel air pushing out of the cylinder. This will put you close to top dead center for #1. Drop the distributor back in with the rotor face towards the #1 on your cap and than start the car up and set the timing.
|
cees87drop
Member # 4066
|
posted
thanks for the info i will try tomorrow but think this is out of my hand
|
cees87drop
Member # 4066
|
posted
will i want my car running by saturday so if any one is willing to come check it out tomorrow i would pay them for their time and gas. just give me a pm.
|
HungryHippo
Member # 537
|
posted
99% sure the distributor isnt put in right
|
5LVENOM
Member # 2282
|
posted
180 out.
|
Cobra5.0JEEP
Member # 1482
|
posted
quote: Originally posted by HungryHippo: 99% sure the distributor isnt put in right
|
cees87drop
Member # 4066
|
posted
called shop to see how much they would charge to re-install my distributor, and the guy told me if that was the problem it should start but not run good. i am looking at $95 + towing
|
Blue Oval
Member # 2548
|
posted
quote: Originally posted by cees87drop: called shop to see how much they would charge to re-install my distributor, and the guy told me if that was the problem it should start but not run good. i am looking at $95 + towing
the car will not run with it like that!hopefully u can find someone in that area willing to do a side job.
|
chosen1
Member # 1906
|
posted
quote: Originally posted by cees87drop: called shop to see how much they would charge to re-install my distributor, and the guy told me if that was the problem it should start but not run good. i am looking at $95 + towing
fuck that. seriously, keep trying you'll get it, unless it something else.
|
cees87drop
Member # 4066
|
posted
quote: If you want to correctly do it bring the motor to top dead center for cylinder #1. To do this remove the #1 spark plug and turn the motor over till you feel air pushing out of the cylinder. This will put you close to top dead center for #1. Drop the distributor back in with the rotor face towards the #1 on your cap and than start the car up and set the timing.
i don't know what the rotor face looks like. [ July 09, 2004, 02:37 PM: Message edited by: cees87drop ]
|
stoauto
Member # 2803
|
posted
hey man, i'll come and set your timing for you if you want, you dont have to pay me shit, just supply some nice cold water and pay my gas ,i could swing by sat. around 4pm. just glad to help out.
|
chosen1
Member # 1906
|
posted
quote: Originally posted by cees87drop: quote: If you want to correctly do it bring the motor to top dead center for cylinder #1. To do this remove the #1 spark plug and turn the motor over till you feel air pushing out of the cylinder. This will put you close to top dead center for #1. Drop the distributor back in with the rotor face towards the #1 on your cap and than start the car up and set the timing.
i don't know what the rotor face looks like.
he means rotor pointed at #1 on the cap.
|
Camaro Kid Z/28
Member # 3100
|
posted
quote: Originally posted by stoauto: hey man, i'll come and set your timing for you if you want, you dont have to pay me shit, just supply some nice cold water and pay my gas ,i could swing by sat. around 4pm. just glad to help out.
you da man!
|
WANARNM
Member # 587
|
posted
willing to help out.. let me know.
|
cees87drop
Member # 4066
|
posted
quote: Originally posted by WANARNM: willing to help out.. let me know.
please give me a call at (408)705-3749,cesar
|
HungryHippo
Member # 537
|
posted
it takes 5 minutes, i'd do it for ya but i'm an hour away. whatever you do, dont take it to a shop
|
cees87drop
Member # 4066
|
posted
just wanted to thanks to every one, and Especially to Junior (WANARNM).
|
Blue Oval
Member # 2548
|
posted
quote: Originally posted by cees87drop: just wanted to thanks to every one, and Especially to Junior (WANARNM).
thats what cafords is about
|