JohnB
Tech Moderator
Member # 969
|
posted
Nope, no rivets needed. The four square gaskets are for the window tracks, they are straight forward to change. They are held in by an 11mm nut; just unbolt the track and slip them off the ends, one end at a time. The window motors a cinch, you only need an 8mm socket..they are held in by 3 self-tapping bolts. Make sure you disconnect the connector on the motor prior to removing/unbolting it...it's a PITA if you forget. As for the door panel clips, if you don't have the correct tool...buy it. The 79-86 door panels are considerably weaker than the 87+ models.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6525 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|