|
Author
|
Topic: Cam-- Valve to piston ?
|
BlowN67
¯
Member # 4229
|
posted
 
 
OK here it goes. I have the gt40 crate motor with the gt40x heads. I want to install the f-cam thats 512 an 1.7's. Will there be any piston to valve problems? should i run this N/A or would it be ok with a blower? thanx JOHN ![[Confused]](confused.gif)
[ May 28, 2004, 12:08 AM: Message edited by: BlowN67 ]
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
Fostang
¯
Member # 3752
|
posted
nope the blower you should give to me.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3012 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
chosen1
¯
Member # 1906
|
posted
i think you'll be ok with the p-v thing, im assuming your installing it dot to dot.
adding a blower will not change your p-v clearances.
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
forced331
¯
Member # 1270
|
posted
Install the cam straight up (0 degree) and you should not have a problem with those heads. My buddy installed an X-303 cam with the same heads with no problems.
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
BlowN67
¯
Member # 4229
|
posted
kool that sounds good. I knew the heads have bigger valves just wanted to make sure with the cam an all. so the cam an 1.7's should be good right??????
As for the putting on a blower i just wanted to know if it was a good cam to go with a blower?
Thx for ur inputs
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
forced331
¯
Member # 1270
|
posted
Your kewl as long as they are stock GT40X heads with 1.94 intake valves. If you have 2.02 intake valves you might have an issue.
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
Quick 88LX
¯
Member # 1950
|
posted
quote:
Originally posted by forced331:
Your kewl as long as they are stock GT40X heads with 1.94 intake valves. If you have 2.02 intake valves you might have an issue.
So in your opinion, what is the maximum lift on a motor with stock flat tops with valve relief style pistons? If .542 inches will fit straight up with a 1.94 intake valve, what is the maximum lift for that same (or similar like 1.90) valve size? Just curios
--------------------
"Men are Made, Not Born"
Car Picture : http://www.angelfire.com/theforce/quick88lx/
Original Member #495. Can I get my number back?
Posts: 1785 | From: Fairfield, CA/Okinawa, Japan | Registered: Oct 2002
| :
|
|
BlowN67
¯
Member # 4229
|
posted
Sweet thats what i want to hear. no problems with that set up. KOOL
Now this ______
\/
As for the putting on a blower i just wanted to know if it was a good cam to go with a blower?
Thx for ur inputs [/QB][/QUOTE] ![[burnout]](graemlins/burnout.gif)
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
forced331
¯
Member # 1270
|
posted
550 max!
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
forced331
¯
Member # 1270
|
posted
That cam will work for a blower! If your not going with 1.7's then the x cam would work also.
I think the TFS stage 1 cam with 1.7's would be perfect for the street and the blower, and also for smog friendly. If your wanting to smog the car with an aftermarket cam it would be harder with the (F)cam cause of the duration.
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
BlowN67
¯
Member # 4229
|
posted
thanx thats all i need to hear, just want a good cam with a blower.. ![[Whoo Whooooo!]](graemlins/woowoo.gif)
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
