Author
|
Topic: Need a BYPASS Valve / Where to get it?
|
AL STOCK
Its All Stock Cuzzon
Member # 1852
|
posted
Someone recommended getting a BYPASS VALVE for my Paxton so engine breaths alot safely..
Where would i find these bypass valves? They screw into the charger intake tube right? Any specific size?
Thanks Dave
-------------------- .:: FANATICS ::.
93 Cobra Teal 93 Cobra V Red 90 SSP SVT Raptor Huracan Rosso Mars E63s W213 Selenite Gray C7Z M7 Daytona Sunrise
Posts: 6499 | From: San Bruno | Registered: Sep 2002
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
Dave, If your only pulling like 2-3 psi like you mentioned you don't need the bypass valve. These valves come in kits offering 8 psi or better. At your level it isn't necessary. If you really want one you can pick them up sometime on ebay or contact vortech and they can send you one
-------------------- R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
AL STOCK
Its All Stock Cuzzon
Member # 1852
|
posted
I was pullin 3psi with the vaccum leaks, i had some guy come over and replace some torn out gaskets - He tested everything and said now im around 7-8psi and definetly need a bypass before i start blowing sh!t up..
-------------------- .:: FANATICS ::.
93 Cobra Teal 93 Cobra V Red 90 SSP SVT Raptor Huracan Rosso Mars E63s W213 Selenite Gray C7Z M7 Daytona Sunrise
Posts: 6499 | From: San Bruno | Registered: Sep 2002
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
I would be shocked if the compressor you have was pulling 7-8 psi. The max I have seen from that compressor with the smallest pulley and a power pipe is about 6-7 psi. You need a boost gauge to know where you are at now.
-------------------- R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
AL STOCK
Its All Stock Cuzzon
Member # 1852
|
posted
quote: Originally posted by mtbaughs: I would be shocked if the compressor you have was pulling 7-8 psi. The max I have seen from that compressor with the smallest pulley and a power pipe is about 6-7 psi. You need a boost gauge to know where you are at now.
Yeah i was shocked myself - as of now im just running it without the belt so its just sitting there... Untill i find a bypass somewhere
-------------------- .:: FANATICS ::.
93 Cobra Teal 93 Cobra V Red 90 SSP SVT Raptor Huracan Rosso Mars E63s W213 Selenite Gray C7Z M7 Daytona Sunrise
Posts: 6499 | From: San Bruno | Registered: Sep 2002
| :
|
|
AL STOCK
Its All Stock Cuzzon
Member # 1852
|
posted
BTW check pms
-------------------- .:: FANATICS ::.
93 Cobra Teal 93 Cobra V Red 90 SSP SVT Raptor Huracan Rosso Mars E63s W213 Selenite Gray C7Z M7 Daytona Sunrise
Posts: 6499 | From: San Bruno | Registered: Sep 2002
| :
|
|
Rob [5LVENOM]
¯
Member # 2282
|
posted
The bosch valve that comes with the base S-trim kit is a 103 (good for 6-8psi), the 110 is good up to 15psi (has brass internals instead of plastic) and is what I and alot of others run instead of spending 180 bucks or whatever for Vortechs pretty race and mondo valves. I bought my 110 for 35 bucks, but I just found acheaper place, take a look. Exact same valves...
http://www.discountswedparts.com/SA_Charge~Air~Bypass~Valve_list.html
Posts: 421 | Registered: Jan 2003
| :
|
|
AL STOCK
Its All Stock Cuzzon
Member # 1852
|
posted
yeah so i can get the ones on that site? They all say 110 though?
-------------------- .:: FANATICS ::.
93 Cobra Teal 93 Cobra V Red 90 SSP SVT Raptor Huracan Rosso Mars E63s W213 Selenite Gray C7Z M7 Daytona Sunrise
Posts: 6499 | From: San Bruno | Registered: Sep 2002
| :
|
|
Sicc98GT
¯
Member # 1862
|
posted
superchargersonline.com also sells bypass valves and most of there stuff is a decent price.
-------------------- Black 98 GT - sold 05 trd off road tacoma
Posts: 485 | From: San Ramon | Registered: Sep 2002
| :
|
|