T O P I C R E V I E W
|
BOTTLED.LX
Member # 3267
|
posted
how can i make 10.5 rims with315 fit in back of 89 lx? and will they stick out? thanks
|
MR GO FAST
Member # 2088
|
posted
Nothing that a hammer and some trimming cant take care of. What wheels and does the car have a stock rear end?
|
NORCAL281
Member # 3754
|
posted
have you thought about doing mini tubs?!? i dont know but 315's out back will look hella sick on a fox!
|
BOTTLED.LX
Member # 3267
|
posted
sorry no mini tube its a stock 8.8 with cobra r'
|
MR GO FAST
Member # 2088
|
posted
check PM's
|
hidnn.o.s.
Member # 1219
|
posted
quote: Originally posted by MR GO FAST: check PM's
If you know of some certain wheel or way to make a 10.5 to fit with 315's send me a pm to please
|
Haze187
Member # 1837
|
posted
i have oe concepts 4 lug y2ks with the 24mm offset and im pretty sure 315s will fit on the back, i have the BBK springs in the rear, which only lowered it about an inch, I also removed the quad shocks.
|
MR GO FAST
Member # 2088
|
posted
quote: Originally posted by hidnn.o.s.: quote: Originally posted by MR GO FAST: check PM's
If you know of some certain wheel or way to make a 10.5 to fit with 315's send me a pm to please
I accept pay pal in the payment of three cookies
|
NORCAL281
Member # 3754
|
posted
quote: Originally posted by Haze187: i have oe concepts 4 lug y2ks with the 24mm offset and im pretty sure 315s will fit on the back, i have the BBK springs in the rear, which only lowered it about an inch, I also removed the quad shocks.
do you have any pix of the rims/tires on the car? i wanna see how it looks with 315's...
|
Chosen1
Member # 1906
|
posted
i read somewhere (therefore im pretty sure its possible) that you can fit a 325/50/15 without a minitub. if i remember correctly he did it with a 10 inch/6.5 b/s draglite. im sure other applications would fit as well.
|
Haze187
Member # 1837
|
posted
i have 265s on right now, but there is a good 1 inch from the tire to the inner well left, and sence the car is not that much lower in the rear, i have all the room in the world on the other side.
pic is weak im sorry
|
MR GO FAST
Member # 2088
|
posted
quote: Originally posted by Chosen1: i read somewhere (therefore im pretty sure its possible) that you can fit a 325/50/15 without a minitub. if i remember correctly he did it with a 10 inch/6.5 b/s draglite. im sure other applications would fit as well.
the kid with the green coupe (kevin) has those...im thinking. Yes the welds 15x10 with a 6.50 back setting is the set up. There is some major hammering to fit those....like a sledge hammer and thoughts of a wacked out ex girlfriend that wrecked your car while putting on lipstick type of aggresion.
|
Haze187
Member # 1837
|
posted
quote: There is some major hammering to fit those....like a sledge hammer and thoughts of a wacked out ex girlfriend that wrecked your car while putting on lipstick type of aggresion. [/QB]
Man, you have some aggression dont ya?
|
Chosen1
Member # 1906
|
posted
quote: Originally posted by MR GO FAST: quote: Originally posted by Chosen1: i read somewhere (therefore im pretty sure its possible) that you can fit a 325/50/15 without a minitub. if i remember correctly he did it with a 10 inch/6.5 b/s draglite. im sure other applications would fit as well.
the kid with the green coupe (kevin) has those...im thinking. Yes the welds 15x10 with a 6.50 back setting is the set up. There is some major hammering to fit those....like a sledge hammer and thoughts of a wacked out ex girlfriend that wrecked your car while putting on lipstick type of aggresion.
sledge hammer on a car to release agression? why not just slip her some arsenic and pretend the car never existed?
|
MR GO FAST
Member # 2088
|
posted
i got payback...
|
WANARNM
Member # 587
|
posted
Damn.. 10.5? thats a pretty wide rim bro.. you can run a 10" without mini tubeing the car.. you just gotta delet the Quad shocks and bang a lil inside the fenedr and roll your lips in.. Here is the link with picture of a coupe with 15x10 with 315/50/15
http://www.southbaystangs.com/forum/viewtopic.php?t=413
|
DRIVINFST
Member # 2430
|
posted
Do you happen to have a pic of this car from a side profile?
|
badazz
Member # 1773
|
posted
i had to edit that thread, its actually 315/60/15 in the rear...just remove your quad shocks, i would recommend some good upper n lowers if yer gonna do so, and roll your fenders, then bang bang bang on the inside.. i am going to do this setup soon. u need 6.5 backspacing. now if ya want to do it in a 17 in rim, i would ask STROKD. he has it on his car
|
BOTTLED.LX
Member # 3267
|
posted
o.k thanks for the reply's. is a mini tube required to put these rims on?
|
Haze187
Member # 1837
|
posted
nope
|
94gt
Member # 3060
|
posted
here's that pic... nice back end profile!
oops, I mean this one... lol
|