|
Author
|
Topic: need help with 2001 gt, please!
|
msj484
¯
Member # 1341
|
posted
 
 
hello all,
it is time for me to make more mods to my car, and i need your help. currently i have:
vrs catted x pipe
mac cold air kit
c&l 87mm mass air
70mm chromed bbk throttle body
american flowmasters
chrome radiator hoses
3.5 inch exaust tips
please give me your suggestions. someone mentioned changing my gears, but i kinda like the stock gear setup, because i do want want my freeway acceration changed. please help. thankx all.
Posts: 270 | From: San Pablo, CA | Registered: May 2002
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Gears.
Gears.
Gears.
You will accelerate FASTER! And your OD will be fine on the highway. Just ask bunchmyfunky w/ his 4.10's.
--------------------
'92 LX T5
Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Red97SVT
¯
Member # 2811
|
posted
Pullies/gears/intake.
If you have the $$ get a T56 to go with the gears, then there is no issue with freeway cruising.
--------------------
Engine: HCI forged 0.30' over N/A.
Suspension: Full Griggs by Apex.
Drive train: T-56, Auburn pro, 31 spline axles, 3.73s.
Posts: 246 | From: Manteca | Registered: May 2003
| :
|
|
msj484
¯
Member # 1341
|
posted
well i got 4 amps, and a 15' woofer, a radar detector, powerfl speakers, and i heard pullies would mess with my electricity.
is intake expensive, would it really help? what about cams?
Posts: 270 | From: San Pablo, CA | Registered: May 2002
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Do you wanr the car to be faster- you know- outrun Cameros?
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Hater
¯
Member # 3085
|
posted
Everything is fine, exept for the C&L Mass air, go with a Pro-M 80mm, and yes gears is a must, 4.10s is my sugestion, and of course underdrive pullies...and if you want a power ader, I would start with a shot of nitrous, NX I recomend you. ![[burnout]](graemlins/burnout.gif)
Posts: 168 | Registered: Jul 2003
| :
|
|
chronicsmokin281
¯
Member # 1649
|
posted
3.90 gears, pulleys, timing adjuster and control arms!
Posts: 261 | From: san jose | Registered: Aug 2002
| :
|
|
bunchmyfunky
CAFords Drag Racing Mod
Member # 360
|
posted
With that much stereo equipment I wouldn't change the pulleys. I would go with gears 3.90s or 4.10s, Nitrous and a Timing Adjuster. 4.10 gears will only up your your rpm by 600 over your stock 3.27s
--------------------
01 GT 5spd
1.76 12.79@105.49
Posts: 2433 | From: Vacaville | Registered: Jul 2001
| :
|
|
Hrly01Stng
¯
Member # 2843
|
posted
Gears 3.73 is a good ratio.. 4.10's are just too damn high.. underdrive pulleys will do alot more.. off road pipes. Dont get a timing adjuster its a waste of $$ You end up pinging and having lots or problems i have friends who has the adjuster and runs 100 octane and still pings.. other power adders. cheap NOS. Or save up 4,000 and get a supercharger kit..
--------------------
HCI blower built shortblock 285ci
Posts: 336 | From: Milpitas | Registered: May 2003
| :
|
|
bunchmyfunky
CAFords Drag Racing Mod
Member # 360
|
posted
quote:
Originally posted by Hrly01Stng:
Gears 3.73 is a good ratio.. 4.10's are just too damn high.. underdrive pulleys will do alot more.. off road pipes. Dont get a timing adjuster its a waste of $$ You end up pinging and having lots or problems i have friends who has the adjuster and runs 100 octane and still pings.. other power adders. cheap NOS. Or save up 4,000 and get a supercharger kit..
First off 4.10s are not to damn high. Do you have them? I do. I commute 150miles a day with them and still get 20-24mpg and run 3000rpm at 80mph. Next the Timing adjuster is not a waste, again do you have one? I do. I have no pinging problems what so ever and I run 89 and 91 octane at 14 degrees timing. If you friends are pinging even with a 100 then there is another problem that the car is having. Plus you will need a timing adjuster if you run the juice. Or you can spend alot more and get a chip.
Posts: 2433 | From: Vacaville | Registered: Jul 2001
| :
|
|
msj484
¯
Member # 1341
|
posted
hello all.
that is 1 thing that i forgot. i already have chip. as far as gears i hear so many different things. the higher i go will change my accel right. as far as maro's i am already beating stock ss's. but want some thing new now. i am scared to get pullies because of all my the different things in my car. what will control arms do? thankx for your feedback everyone.
Posts: 270 | From: San Pablo, CA | Registered: May 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote:
Originally posted by Hrly01Stng:
Gears 3.73 is a good ratio.. 4.10's are just too damn high.. underdrive pulleys will do alot more.. off road pipes. Dont get a timing adjuster its a waste of $$ You end up pinging and having lots or problems i have friends who has the adjuster and runs 100 octane and still pings.. other power adders. cheap NOS. Or save up 4,000 and get a supercharger kit..
3.73's are weak nuts gears for a mostly stock 4.6 such as the one this guy has. He needs the 4.10's at least. Don't be affraid of the 4.10's they aren't evenm close to as bad as people say and they will deffinately wake your car up!
Timing adjusters are not a waist of money. Buying the adjuster once is cheaper than paying to have a retune everytime you want to change your timing. The only reason a timing adjuster would cause the car to detinate would be USER ERROR! So you might give you friend the heads up, cause 100 octane on 99% of the 4.6's in existance is rediculous.
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote:
Originally posted by msj484:
hello all.
as far as maro's i am already beating stock ss's. but want some thing new now. thankx for your feedback everyone.
I take it that you are racing stock first generation camaro's. Cause here on planet earth any LT1 LS1 SS would hand you your ass, (judging from the mods you have listed). Not to mention all the worthless dead weight in sterio equiptemt you got going on there ![[patriot]](graemlins/patriot.gif)
[ August 20, 2003, 04:40 PM: Message edited by: Yellow94GT ]
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
cegan
¯
Member # 3185
|
posted
BBK long tubes, with a complete Bassini cat back system, flowmasters suck and pulley's are a waste of money, you gain a few HP
Posts: 70 | From: Santa Rosa, Union City | Registered: Aug 2003
| :
|
|
mustanggt5091
All I need is.....
Member # 444
|
posted
N2O and a new chip or timing ajuster! I fyou want a NX kit let me know!!
P.S. Gears will deffinetly help!!!
--------------------
88 GT 357w (SOLD):(
06 Limited Edition R6 !!!!!
Posts: 2353 | From: Fairfield / Santa Rosa , Ca | Registered: Sep 2001
| :
|
|
Red97SVT
¯
Member # 2811
|
posted
Well, unless you are at idle a lot, 4.10s will have the engine spinning a bit faster to compensate for the pullies. Just get a red top, deep cycle, gel cell battery for idle times.
As for the intake and cams? Yes they are expensive. They say the cams can be replaced in the car, but I sure wouldn't want to do it. Either way there is a lot of labor involved. The intake isn't too bad, but your throttle body and CAI would have to go as the intake uses a dual bore throttle body.
--------------------
Engine: HCI forged 0.30' over N/A.
Suspension: Full Griggs by Apex.
Drive train: T-56, Auburn pro, 31 spline axles, 3.73s.
Posts: 246 | From: Manteca | Registered: May 2003
| :
|
|
msj484
¯
Member # 1341
|
posted
how much would a nos kit run. cant i get my chip reburnt? i have not got it burned since it was stock. i am sure that if i took it out now there would be a difference. so if i get 4.10's what would change on the car?
Posts: 270 | From: San Pablo, CA | Registered: May 2002
| :
|
|
chronicsmokin281
¯
Member # 1649
|
posted
need to fix speedo if change gears.
Posts: 261 | From: san jose | Registered: Aug 2002
| :
|
|
Red97SVT
¯
Member # 2811
|
posted
quote:
Originally posted by msj484:
how much would a nos kit run. cant i get my chip reburnt? i have not got it burned since it was stock. i am sure that if i took it out now there would be a difference. so if i get 4.10's what would change on the car?
I don't know too much about N2O. There are 2 types of systems (wet or dry). I have heard that one of them, the type that injects it just after the throttle body, (I think thats the dry type), can cause N2O puddles in the intake. If you then have a backfire your plastic GT intake will be trash.
--------------------
Engine: HCI forged 0.30' over N/A.
Suspension: Full Griggs by Apex.
Drive train: T-56, Auburn pro, 31 spline axles, 3.73s.
Posts: 246 | From: Manteca | Registered: May 2003
| :
|
|
chronicsmokin281
¯
Member # 1649
|
posted
one thing with the nitrous on our intake is that i heard that squeezing 125+ of nos can/will blow the intake! but sometime in the future i'll be havin the "wet" nos setup but also was gonna do the bullit intake swap too!
Posts: 261 | From: san jose | Registered: Aug 2002
| :
|
|
QWICK46
¯
Member # 1843
|
posted
quote:
Originally posted by mustanggt5091:
N2O and a new chip or timing ajuster! I fyou want a NX kit let me know!!
P.S. Gears will deffinetly help!!!
Speaking of N20 for the 4.6, since you're a dealer, whats the deal with NX's NXL kit? Is it available yet & what's included in the kit? I'm asking here rather than PMing you because I think a lot of people with a 4.6 who might check this thread would be interested to know.
Thanks in advance,
--------------------
Michael
'02 GT ~ sold for a Big, Slow Dodge Ram
'03 SV650S
'04 R1100S ~ The daily driver
Posts: 243 | Registered: Sep 2002
| :
|
|
msj484
¯
Member # 1341
|
posted
how much would a nos kit run. cant i get my chip reburnt? i have not got it burned since it was stock. i am sure that if i took it out now there would be a difference. so if i get 4.10's what would change on the car?
Posts: 270 | From: San Pablo, CA | Registered: May 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
