T O P I C R E V I E W
|
FasterDamnit
Member # 442
|
posted
I keep seeing turbocoupes at my local jy. Can the rear disk brakes and hardware be pulled off and bolted to a '92 LX 8.8? Don't want the whole axle- don't need it.
|
Black94 5.0
Member # 655
|
posted
Try this:
http://www.mercurycapri.com/technical/drivline/88ttcra.html
|
FasterDamnit
Member # 442
|
posted
Doesn't answer my question.
|
Tri-Bar
Member # 2191
|
posted
Yes it can be done,brackets,rotors and calipers. It come out to be the same as the SSBC setup. You will need to buy the SS brake hose.The whole axle housing and axles were longer on the T-Bird but the spacing between the braket,caliper and rotor are the same as the stock mustang.Good luck.
|
FasterDamnit
Member # 442
|
posted
quote: Originally posted by Tri-Bar: Yes it can be done,brackets,rotors and calipers. It come out to be the same as the SSBC setup. You will need to buy the SS brake hose.The whole axle housing and axles were longer on the T-Bird but the spacing between the braket,caliper and rotor are the same as the stock mustang.Good luck.
Excellent! Thanks!
|
91GR40LX
Member # 1329
|
posted
put 87 tcoupe in 91 must lx, did not work! too wide, rubbed like no other.
|
FasterDamnit
Member # 442
|
posted
quote: Originally posted by 91GR40LX: put 87 tcoupe in 91 must lx, did not work! too wide, rubbed like no other.
That's why I don't want the whole rear end. Just bolt the brakes to mine.
|
Tri-Bar
Member # 2191
|
posted
You do not use the the whole axle housing and axles, just the Backing brackets, calipers w/ caliper brackets and rotors. Thats all, I must not have made the clear enough in my first post sorry.
|
FasterDamnit
Member # 442
|
posted
quote: Originally posted by Tri-Bar: You do not use the the whole axle housing and axles, just the Backing brackets, calipers w/ caliper brackets and rotors. Thats all, I must not have made the clear enough in my first post sorry.
It was clear. At least to me...
|
Black94 5.0
Member # 655
|
posted
quote: Originally posted by FasterDamnit: Doesn't answer my question.
Sorry....
|
93redcobra
Member # 1344
|
posted
okay which junkyard is this, ive been looking for a t coupe rear end for a while now. do you know much they want for it
|
Tri-Bar
Member # 2191
|
posted
No clue on price, I see them at the Pick-n-pull out in Stockton amd Modesto all the time.
|