T O P I C R E V I E W
|
91sleeper
Member # 779
|
posted
Got some new weather stripping for my front two dorrs and have never doen it before. Any pointers and/or directions to follow. I did a search and didn't find much. I got the strippings from 50 resto.
Thanks
|
GR40coupe
Member # 698
|
posted
Remember how it pulls out then, put the new the same way the old pulls out it can't be to hard to do i take it it's the stiping by the window correct. [ February 12, 2003, 10:50 PM: Message edited by: GR40coupe ]
|
91sleeper
Member # 779
|
posted
Its the stripping thats on the inside of the doors.
|
91sleeper
Member # 779
|
posted
I guess nobody has done this before It's not as easy as it sounds.
|
87 Saleen
Member # 1549
|
posted
how hard can it be?
|
91sleeper
Member # 779
|
posted
If you havent done it dont respond
|
Norcalbmxer
Member # 235
|
posted
I have done it, and if you cant figure it out on your own, there is only 2 posibilities
#1. You got the wrong stuff. Did you check to see if its the same as the old stuff? or did you just rip your old stuff out and throw it away
#2 You are to incompetent to work on your car and no-one would be able to walk you through installing it anyway
|
91sleeper
Member # 779
|
posted
I didnt say I couldnt install it I said can anyone give me any tips and/or pointers I think I am far than compitent enough to do this.
|
89_FakeSnake
Member # 1253
|
posted
It's so easy it's not even funny. However, you will have to get the rear interior panels unscrewed and moved, then the headliner trim around the edge of the door out of the way. Oh, the kick panel must also be removed along with the door sill plate. Seriously, it took me 2 minutes to get it in place once those items were out of the way. Good luck dude.
|
91sleeper
Member # 779
|
posted
quote: Originally posted by 89_FakeSnake: It's so easy it's not even funny. However, you will have to get the rear interior panels unscrewed and moved, then the headliner trim around the edge of the door out of the way. Oh, the kick panel must also be removed along with the door sill plate. Seriously, it took me 2 minutes to get it in place once those items were out of the way. Good luck dude.
Thanks a lot!
|