T O P I C R E V I E W
|
1990GT50
Member # 2119
|
posted
when i put my car in reverse it makes a grinding sound. everything is new (cluch, trans. etc...) what could it be? possibly a minor adjustment? THANKS
|
Mustangfiv0
Member # 2231
|
posted
Mine does the same exact thing, people tell me its normal for the reverse in the mustangs, i have an 88, what i do is put it in 5th gear, then put it in reverse, and it dosnt grind any more. try that it works for me peace
|
98StangPower
Member # 518
|
posted
Possibly could be a syncro going out or already gone out.
|
street_illegal_stang
Member # 1554
|
posted
with the t-5 try first then reverse also blip the engine to about 1200 rpm. i never grinded the reverse since i bought the car try it.
|
5project stang0
Member # 2082
|
posted
no its nothing, everybody i know with a 5 speed has the same thing, its just the synchros. When you want to pop it in reverse simply go to 5th gear and then straight down to reverse and you wont have that problem.
|
fiveohmike
Member # 1437
|
posted
Reverse is an Un-Synchroed gear....but i think its on the same shaft as t5th gears so when you stick it in it matches whatever speed you were at on that shaft and then easily slides into reverse....mine does it tooo and so does every other Mustang with a t5 lol
Mike
|
1990GT50
Member # 2119
|
posted
thanks i had to make sure i wasnt killing the tranny too soon
|
87 Saleen
Member # 1549
|
posted
You have to make sure you are completely stopped first. Then shift THIRD, and go reverse. It's like butter and faster than first or fifth. (If you're in a hurry- U*turn or something)
|
91sleeper
Member # 779
|
posted
Get something other than a t5 and you will be fine.
|
PeNiNsula302
Member # 1061
|
posted
just go 5th to reverse and its all good
|
88gt
Member # 579
|
posted
First to reverse always works for me. Make sure you're not rolling when you do it either.
|
Mustangfiv0
Member # 2231
|
posted
quote: Originally posted by 88gt: First to reverse always works for me. Make sure you're not rolling when you do it either.
What happens if ur rolling??? [ February 09, 2003, 02:19 PM: Message edited by: Mustangfiv0 ]
|
91sleeper
Member # 779
|
posted
quote: Originally posted by Mustangfiv0: quote: Originally posted by 88gt: First to reverse always works for me. Make sure you're not rolling when you do it either.
What happens if ur rolling???
It will grind.
|
azl
Member # 2112
|
posted
reverse in T5s isn't synchronized. that means there is nothing to slow down or speed up the gear when you shift. when you are in neutral and the clutch is out, all of those gears in the tranny are still spinning at 800 RPM, they just aren't bound to the wheels. when you jam it into reverse, all the little dog on that gear teeth collide and round off until they slow enough to engage.
it's normal. shift straight from 5th or 1st to reverse when stopped; don't shift to reverse when moving forward. if it grinds too many times then it will break, just like every other gear. every T5 in the world will do this, world class, non-WC, or WC-Z. if you don't like it I think the T-56 does have a synchro'd reverse gear.
|
1990GT50
Member # 2119
|
posted
thanks
|