T O P I C R E V I E W
|
88GTstunna
Member # 2301
|
posted
Can you all tell me what is good and bad about this cam? I just got one.
|
Black94 5.0
Member # 655
|
posted
Its better than stock...
|
93PONY
Member # 60
|
posted
Good: Better then stock Can be used with weak valvesprings Passes smog Cheap
Bad: Idle quality Slow ramp-rates so there's a LOT of power left on the table. Generic design (220/220 110LSA/110ICL) that only works OK with most combos. Hence the idle problems. Not really ment for an EFI motor. Would work much better in a Carb setup.
|
shade-tree
Member # 298
|
posted
nearly as magical as the B-303 cam.
any car I've listened to with the E-303 cam has a pretty sweet idle, IMHO.
|
Cobra5.0Jeep
Member # 1482
|
posted
I think my idle sounds badass with it. i have had some problems with the idle but i don't think its because of the cam. I've felt the HP increase especially when i get up around 3,000RPMs it starts to pull a lot harder.
|
hidnn.o.s.
Member # 1219
|
posted
Seen many idle problems with that cam. Good luck.
|
mustangcam302
Member # 2315
|
posted
IMO...like all alphabet cams, it old technology....much better options out there with better grinds.
|
WANARNM
Member # 587
|
posted
You could of gone with a TFS stage 1 or 2. Those are way better then the alphabet cams IMHO.
But anything is better than stock i say.
|