|
Author
|
Topic: WooHoo! Ordered my cam today!
|
93PONY
Mr. Valve Events
Member # 60
|
posted
 
 
I finally did it! Ordered up a custom grind from CompCams.
Just a simple single pattern 218/218 113LSA .537 lift w/1.7's, but it should really wake my little motor up!
Hopefully it'll be here by the end of January. ![[Eek!]](eek.gif) Comp is out of Ford hydrolic-roller cores.
Can't wait to pop that puppy in!
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Stimson
_
Member # 51
|
posted
Sweet. Are you going to dyno it afterwards to see how much RWHP you gained or just look for a MPH gain at the track?
Posts: 2373 | Registered: Jun 2000
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by st5150:
Sweet. Are you going to dyno it afterwards to see how much RWHP you gained or just look for a MPH gain at the track?
This new cam will increase the airflow through the motor + increase cylinder pressure dramatically. Hell yes I'm gonna get it dynoed & have the chip re-burned!
I'm no gumby. ![[Wink]](wink.gif)
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
StoplightWarrior
¯
Member # 211
|
posted
Hey keep us posted. I want to put a cam in the 94 Cobra, so I'd be real interested to see how it works!
--------------------
2000 GT
couple bolt ons
Check out the website: peep it
Posts: 2952 | From: Bay Area, CA | Registered: Mar 2001
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by StoplightWarrior:
Hey keep us posted. I want to put a cam in the 94 Cobra, so I'd be real interested to see how it works!
Totally different setup....
But, let me know your mods & I can find a nice cam that'll work well.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
StoplightWarrior
¯
Member # 211
|
posted
quote:
Originally posted by 93PONY:
quote:
Originally posted by StoplightWarrior:
Hey keep us posted. I want to put a cam in the 94 Cobra, so I'd be real interested to see how it works!
Totally different setup....
But, let me know your mods & I can find a nice cam that'll work well.
Shorty headers, mac hpipe w/cats, flows, pulleys, 65mm throttle body, mac cold air(but will be replaced with a pro-m soon) 3.73 gears and a Diablosport chip. Thanks!
--------------------
2000 GT
couple bolt ons
Check out the website: peep it
Posts: 2952 | From: Bay Area, CA | Registered: Mar 2001
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Are you keeping it this way?
No plans for heads/intake/supercharger anytime soon?
Wanna keep it smogable right?
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Shaun, this is great news bro. Let me know if you need any help wrenching. Oh yeah, and I want to be there when you degree that cam in. ![[Big Grin]](biggrin.gif)
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
StoplightWarrior
¯
Member # 211
|
posted
quote:
Originally posted by 93PONY:
Are you keeping it this way?
No plans for heads/intake/supercharger anytime soon?
Wanna keep it smogable right?
Smog isnt as much of a concern But we might throw some AFR's on there too...Probably keep the stock intake...
--------------------
2000 GT
couple bolt ons
Check out the website: peep it
Posts: 2952 | From: Bay Area, CA | Registered: Mar 2001
| :
|
|
91PONY
Mrs. Valve Events
Member # 206
|
posted
End of January?! By that time I'll be ordering mine!
--------------------
Heather '91 GT
Posts: 1477 | From: Citrus Heights, CA | Registered: Mar 2001
| :
|
|
RiddlerGT
Midnight King
Member # 113
|
posted
quote:
Originally posted by StoplightWarrior:
quote:
Originally posted by 93PONY:
Are you keeping it this way?
No plans for heads/intake/supercharger anytime soon?
Wanna keep it smogable right?
Smog isnt as much of a concern But we might throw some AFR's on there too...Probably keep the stock intake...
I woudnt keep the stock intake on a AFR set up only choking it, a missmatched combo wont make shit for power
--------------------
SR
Posts: 2292 | From: San Ramon | Registered: Dec 2000
| :
|
|
StoplightWarrior
¯
Member # 211
|
posted
quote:
Originally posted by RiddlerGT:
quote:
Originally posted by StoplightWarrior:
quote:
Originally posted by 93PONY:
Are you keeping it this way?
No plans for heads/intake/supercharger anytime soon?
Wanna keep it smogable right?
Smog isnt as much of a concern But we might throw some AFR's on there too...Probably keep the stock intake...
I woudnt keep the stock intake on a AFR set up only choking it, a missmatched combo wont make shit for power
So what intake would you match with the afr's and the cam?
--------------------
2000 GT
couple bolt ons
Check out the website: peep it
Posts: 2952 | From: Bay Area, CA | Registered: Mar 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Performer RPM! ![[burnout]](graemlins/burnout.gif)
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
Jeff S
¯
Member # 371
|
posted
quote:
Originally posted by RiddlerGT:
I woudnt keep the stock intake on a AFR set up only choking it, a missmatched combo wont make shit for power
But a stock intake for a 94 Cobra is a Cobra intake which would work quite well with a cleaned up lower. You wouldn't want to go to the Performer RPM unless you have 3.90 gears or higher and rev past the factory rev limiter.
--------------------
'90 Mustang LX: 8.53 @ 157.92 w/ 1.33 60' on DR's
'10 ZR1: FOR SALE
'14 E63 S: RENNtech ECU
'04 Gallardo: UGR TTG
Posts: 2121 | From: San Jose, CA | Registered: Aug 2001
| :
|
|
|
|
FordPny
¯
Member # 510
|
posted
Hey sean its Alen from the last show,
Im glad your getting the cam you ever hella talking about at the show.
you still need to give me a ride in that thing.
![[patriot]](graemlins/patriot.gif)
--------------------
Holla at yoo boooyyy
Posts: 2458 | From: San Jose CA | Registered: Oct 2001
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
The stock Cobra intake will work quite well w/a ported lower. The performer RPM will also work well if you plan on shifting above 6K.
I'd wait on the cam for now & get a custom grind once you finish everything else. (heads, exhaust, gears, etc)
If you really want a decent cam look for a used E or B....better yet a small XE series cam. I wouldn't waste my money on a new one though. A used one you can sell later on for whatever you buy it for.
I know of an E for sale if you're interested. & can install & degree the cam cheap. From the stock Cobra cam (T-bird) to the E, you can expect ~30HP.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Stimson
_
Member # 51
|
posted
quote:
Originally posted by 93PONY:
quote:
Originally posted by st5150:
Sweet. Are you going to dyno it afterwards to see how much RWHP you gained or just look for a MPH gain at the track?
This new cam will increase the airflow through the motor + increase cylinder pressure dramatically. Hell yes I'm gonna get it dynoed & have the chip re-burned!
I'm no gumby.
Save the cam and dyno tune money and adress the real restriction... those GT40 heads on a 331 stroker bottem end
Will you change the clutch out and get an accurate track MPH/ET with the stock cam?
Posts: 2373 | Registered: Jun 2000
| :
|
|
FireWhore
¯
Member # 781
|
posted
what kind of #'s would u expect from this?
--------------------
Mods: SLP Cold Air, 85MM Maf, 1LE Inatke Elbow, Custom Muffler, OBD1 CPU
AIM: FireChickenLS1
Posts: 1310 | From: Livermore,CA | Registered: Jan 2002
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Sawson....ah..you haven't changed. Buy me a Dart block & I'll slap on some AFR 165's w/2.02 valves & a Ported Performer intake.
These heads are good for 500RWHP. Isn't that enough?
The stage 3 clutch is sitting in the livingroom. I'm in the process of polishing the car again...gonna be a few days/weeks till I can get to dropping the trany.
Alen, met me at the dyno-tune appointment & I'll give you a ride.
My final goal is 500RWHP w/all the smog equipment & stock heads/intake. The cam will get me close, then I'll slap on an electric fan & maybe some underdrive pulleys.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
cobraman_1994
¯
Member # 467
|
posted
dude, if you got a dart block, then i hope youd match it up with the 1100 kit
--------------------
86 GT
Posts: 4882 | From: eldorado hills | Registered: Sep 2001
| :
|
|
AaronC
¯
Member # 86
|
posted
Cool Shaun! Let me know when you need a hand.
--------------------
1991 GT Convertible: Stock 157k mile shortblock, HiTech cam, AFR 165 heads, Edelbrock RPM intake, 1 3/4 headers
12.23 at 112.99
Best MPH 113.97
Posts: 776 | From: woodland | Registered: Dec 2000
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by AaronC:
Cool Shaun! Let me know when you need a hand.
Won't be for a while. Comp says they may not have Ford cores till January.
Should be an easy swap, don't even need to take off the lower intake. ![[Razz]](tongue.gif)
Heather got me those bad-ass magnetic lifter holders for my B-day.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Stimson
_
Member # 51
|
posted
Yeah, call me a old fashion 5.O traditionalist time proven TFS+centrifical boost junky. We use to hang out on corral.net before Incon, AFR and custom cam addicts ran us out
70 RWHP is a lot to gain from a cam to hit the 500 rwhp mark, but no doubt some Trick flow TW's will get you that number for $1000 Of course Ed Curtis would never talk to you again, but your ranking on www.californiafords.com/fastest.htm would conderably shoot up
Posts: 2373 | Registered: Jun 2000
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
I don't know if my dyno graph is on the net anywere, but the power dropped off so fast that by just retarding the stock cam 6-7 degrees from were it is now will give me 35-40RWHP!
Power stays constant from 4800-5200, then drops like a rock. At 4800 torque is 470RW. Retarding the cam 6 degrees would pull the powerband 5-700rpm higher.
The custom that I made also has some unique valve-timing to keep the exhaust valve from opening in the powerstroke.
I guess we'll see what happens on the dyno.
You do know Ed C. runs TW's in his car right?
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
