T O P I C R E V I E W
|
sic91sleeper
Member # 779
|
posted
would auto lite 24's be ok? Gapped at .40? What should I set the timing at?
Just out of curioustey....
Thanks
|
hidnn.o.s.
Member # 1219
|
posted
Gap em at 35 and set timing to 7 or 8 degrees.
|
sic91sleeper
Member # 779
|
posted
I was told with a 75 shot i can leave the timing at 10 degrees. Is that true?
|
RiddlerGT
Member # 113
|
posted
I would go a colder plug but im sure with a 75 shot u can leave the timing at 10
|
hidnn.o.s.
Member # 1219
|
posted
With a 75 shot I am sure you could. I am used to putting a 150-175 shot on my cars.... , in which case I toss in 2 stage colder plugs gapped at 32, and put my timing at 7-8 degrees. It has worked like a charm over the years for me.
|
AaronC
Member # 86
|
posted
I ran autolite 24's gapped at .050" with MSD 6A and coil. That was with the 100 shot from an NX kit. Ran well and gained 11 MPH with it. 10 degrees timing on pump gas too. 91 5.0 motor with 156k when I took it out. I ran into some tuning issues on the 150 shot but it pulled super hard.
|
bigg matt
Member # 1643
|
posted
i had a plate from nw on my we took the spraybar out and plumbed 2 ne shark nozzles in it both set for a hundred shot. i used autolite 23's 40 gap and used a retard box from msd, whenever i hit the button in took 8 degrees of timing...that was coool still had the motor w/out the nos and with the nos anywaz i never got a chance to run it but i beat some fast cars streetracing
|
sic91sleeper
Member # 779
|
posted
Thnaks for the help everyone . My kit is in and everything is working great. I used autolite 24's gapped at .035 with 10 degrees of timing.
|
Mirza
Member # 135
|
posted
you might want to look into NGK-TR6's..great plugs..I have em gapped @ .035 an they work great
|