T O P I C R E V I E W
|
erccobra
Member # 1112
|
posted
first of all thanks for all your help guys ,,any ways what kind of lowering springs saleen or eibach ,,i am doing springs first then the shocks will follow,,,also where can i get a gauge pod but i want a full one to totally replace the stock pillar .i have seen them on hard tops but never on a conv.also last but not least the question you guys have heard over and over ,what size 3.73 or4.11 ,aand can anyone tell me exactly what my rpm will be w/4.11 at about 85
|
blackcobra98
Member # 1078
|
posted
Hey-I have a '98 Cobra 'vert also...I went with the Eibachs..like a 1.5" drop, I believe. As far as pods go, I had to install my Monster Tach on the far left of the dash due to the fact that Motorsport Dynamics here in Sacramento told me that they couldn't mount anything on the pillar because it wouldn't be stable enough.I have no idea about the gears...I need to start looking into that myself. Brad
|
gr40coupe
Member # 698
|
posted
quote: Originally posted by erccobra: first of all thanks for all your help guys ,,any ways what kind of lowering springs saleen or eibach ,,i am doing springs first then the shocks will follow,,,also where can i get a gauge pod but i want a full one to totally replace the stock pillar .i have seen them on hard tops but never on a conv.also last but not least the question you guys have heard over and over ,what size 3.73 or4.11 ,aand can anyone tell me exactly what my rpm will be w/4.11 at about 85
If you drive your car every day (freeway) iwouldn't go with 410's 410's are good gears if you are n/a 373 are practical for daily driving
|
93Snyper
Member # 1058
|
posted
I know that Jegs have full pillar pods for 3 gagues, also ummm... forgot but take a look the MM&FF, too much good stuff in there!...as for the 4.11s i think you'd be in the 3000-3500 range, just an educated guess tho, my friend has 4.10's an hes gonna get rida'em...73's da way to go...
|
sic91sleeper
Member # 779
|
posted
Hey guys dont forget about www.summitracing.com
|
9cobrasnake9
Member # 575
|
posted
Why are you looking at just saleen and eibach. There are so many good springs out there. I have steeda's and love them but if I did it again I would go with H&R 2 inch drop and griggs caster camber plates. Just my .02
|
erccobra
Member # 1112
|
posted
how do you drop it 2 inches ,mine is dropped an 1 1/2 and i still gp slow down those bumpy roads
|
ScuEleanor
Member # 785
|
posted
check out how I put my monster tach in my saleen...might give you an idea
|
ScuEleanor
Member # 785
|
posted
http://cgi.ebay.com/ebaymotors/ws/ebayISAPI.dll?ViewItem&item=601004076&indexURL=2&photoDisplayType=2#ebaylargephotohosting
|
imbroken
Member # 165
|
posted
whew, I remember back in the day when I feared the gear... then Mike (BLUE98SVT) told me a story.. driving from Sac to So. Cal on a tank and a half of gas... hmm... that was better mileage than I was getting previously.. And he was running a 4.30 ass end gear... welp.. I proceeded to buy 3.73's.. .and stare at them for awhile.. and then.. I decided.. Forget these little 3.73's! 4.30's here I come!.. Don't fear the gear...
I drive 35 miles to work and back every day... and the cobra gets killer gas mileage.. (nothing compared to the 95 EX though)...
my friend just put 4.10's in his 95 AODE GT... and that thing rips!
just my $.02....
|