T O P I C R E V I E W
|
Black88GT
Member # 394
|
posted
My car started to make a rattling noise, like something loose and rolling around in a gutted cat. Well, I have the stock pipe on, so I think its ok. So Could it be cluch chatter? If so, what causes it, and how can I fix it? thanks.
|
st5150
Member # 51
|
posted
You can feel clutch chatter. Does your car shake? Does it only happen when taking off from a dead stop?
|
Black88GT
Member # 394
|
posted
Well It does it all the time. cluch in or out. Rolling or not.
|
Blown GR40 Mystic
Member # 476
|
posted
quote: Originally posted by st5150: You can feel clutch chatter. Does your car shake? Does it only happen when taking off from a dead stop?
my friends does it from a stop. what does that mean?
|
Quick 88LX
Member # 1950
|
posted
quote: Originally posted by Blown GR40 Mystic: quote: Originally posted by st5150: You can feel clutch chatter. Does your car shake? Does it only happen when taking off from a dead stop?
my friends does it from a stop. what does that mean?
It means the flywheel isn't engaging completely with the clutch and the two are literally SKIPPING on each others surface. Usually a sign of a worn out clutch or sometimes more than that. You will definitely feel clutch chatter. It feels like a damn earthquake underneath your seat! At any rate, replacing your clutch and resurfacing your flywheel will solve that problem for your friend.
BLACK88GT: As for the constant noise, like the constant rattling or whatever you have, I am not sure about that one. Does it effect your drievability? What does it FEEL like when you are sitting in the car?
|
Black94 5.0
Member # 655
|
posted
quote: Originally posted by Black88GT: Well It does it all the time. cluch in or out. Rolling or not.
Then its not clutch chatter.....Clutch chatter is caused by the flywheel having an un-even surface to clutch plate on a clutch assembly...Its normally caused by heat spots, metal to metal or forgetting to re-surface the flywheel after a new clutch install...
If the car makes the noise at idle, then put it on jack stands and go under the car and listen for it....Try to isolate if its the exhaust or if its the driveline/clutch....
|
siri95
Member # 2840
|
posted
im glad i found this. post. well my 95gt has been making noise lately when i get into gear. like when i go to reverse push the cluch down then put it up. and as i put it up.. i a thump noise.. just one thump.. but its loud enough for me to hear and feel. what does it mean? do i need a new cluch. o yeah its an everyday driver too.
|
Black88GT
Member # 394
|
posted
quote: Originally posted by Black94 5.0: Then its not clutch chatter.....Clutch chatter is caused by the flywheel having an un-even surface to clutch plate on a clutch assembly...Its normally caused by heat spots, metal to metal or forgetting to re-surface the flywheel after a new clutch install...
If the car makes the noise at idle, then put it on jack stands and go under the car and listen for it....Try to isolate if its the exhaust or if its the driveline/clutch.... [/QB]
quote: Originally posted by Quick 88LX:
BLACK88GT: As for the constant noise, like the constant rattling or whatever you have, I am not sure about that one. Does it effect your drievability? What does it FEEL like when you are sitting in the car? [/QB]
Thanks for the input. Ill have to look at it this weekend. It sounds a little like part of the exhaust is loose, but I dont hear an air leak. Thanks again.
|
Sean90GT
Member # 33
|
posted
Check the heat shields on the cats. Sometimes they will come loose and start to rattle around. They can be tack welded back in place or some people get a big ass hose clamp and tighten it down around it.
If that's not it try taking a rubber mallet (or even use the heel of your hand) and give your cats a soft whack to see if they rattle inside. Just don't come back here telling us how you just whacked your cat!
|
outlawd94cobra
Member # 265
|
posted
My Cobra is doing that right now also. A few months back i had to put the Stock exhaust set-up back on for smog. Well, the pipes had been sitting for a VERY long time (could of rusted up), who knows how bad it could of got in the inside. Well, now i have to take it back off because i think the screens in the cats have broke and are stuck inside rattling. Its not my clutch or flywheel.
|
Teddy Tiger
Member # 2473
|
posted
quote: Originally posted by siri95: im glad i found this. post. well my 95gt has been making noise lately when i get into gear. like when i go to reverse push the cluch down then put it up. and as i put it up.. i a thump noise.. just one thump.. but its loud enough for me to hear and feel. what does it mean? do i need a new cluch. o yeah its an everyday driver too.
Does your gear shifter rise up when you hear the thump? Sometimes that could be a broken tranny mounting...
|
5LVENOM
Member # 2282
|
posted
Check for a spun balancer too, I had similar symptoms, turned out to be the balancer. Just an easy thing to check, also loose driveline bolts.
|
Luke87GT
Member # 21
|
posted
quote: Originally posted by Black88GT: Well It does it all the time. cluch in or out. Rolling or not.
Based on what you said above, you do not have clutch chatter. Its something else. Luke
|