T O P I C R E V I E W
|
j0eyabs
Member # 1026
|
posted
Anyone ever install underdrive pulleys in their 5.0? I have a 90 5.0 and i want my underdrive pulleys instaled. I just want the crank and waterpump pulley installed now, ill do the alternator later when i get a bigger alt. Can anyone here do it for me, if so how much do you want? I live in San Leandro so id like to go somewhere nearby thanks
|
5.0Brian
Member # 262
|
posted
It's very easy to do, you should give it a shot. Or do you not have access to any tools? If not, I'm sure someone could slap those on there in a few minutes for you. You'll also need to get a new belt.
|
j0eyabs
Member # 1026
|
posted
no i dont have a good tool set, also i can use the factory belt according to the manufaturer and ford.
|
HungryHippo
Member # 537
|
posted
i'll do it for 10 bucks if you come to my house(pinole).
|
j0eyabs
Member # 1026
|
posted
damn, ill do it, ill even give 20 dollars, could you do it on a saturday oe sunday say 1 week or 2 from now? also when i reinstall the pulleys i wanted to put a flexalite fan on it, would that be a problem?
|
HungryHippo
Member # 537
|
posted
sure thing. just PM me
|
281n/a
Member # 1465
|
posted
hey man thanks for doing his but not mine
|
93PONY
Member # 60
|
posted
quote: Originally posted by 281n/a: hey man thanks for doing his but not mine
4.6's are a little more difficult. You need a pulley-puller.
|
flatacid
Member # 878
|
posted
what kinda pulleys are they? just alittle heads up. with my fms, i had to change the alt pulley, or else the stock belt wouldn't fit. and you need an impact wrench for the alt pulley.
|
j0eyabs
Member # 1026
|
posted
they are made by hawks racing.
|
street_illegal_stang
Member # 1554
|
posted
i got hawks racing pullies. i used and i'm still using the stock serpentine belt with the pullies,i think you'll have no problem.they work great when you get full exhaust and a 70mm or bigger mass air sensor. ![[burnout]](graemlins/burnout.gif) [ December 30, 2002, 08:57 PM: Message edited by: street_illegal_stang ]
|
rnowacki
Member # 686
|
posted
Just pull the alternator and bring it down to Kregans and they'll use their impact wrench on it to switch the pullies for free. That is the cheapest way. That is the easiest thing I've ever installed...even easier then cold air, give it a try.
|
j0eyabs
Member # 1026
|
posted
i already got a 70mm air meter and a cat back exhaust. I wanted to wait on installing the alternatort pulley cause i still have the stock alternator and i know it wont support my accesories with the different pulley. also i cant do the install my self because i dont have a vast majority of tools, espceially since the new pulley came with allen head bolts and the instructions say to use their bolts and not the stock ones.
|
5project stang0
Member # 2082
|
posted
Listen up everybody, hungryhippo has volunteered to install everybody's underdrive pulleys!
|
shade-tree
Member # 298
|
posted
if you're stuck or if people flake I'll be wrenching on my car this weekend and feel free to stop by. I'd be surprised if it took us 15 minutes (air tools) from popping the hood to shutting it.
you bought the 70mm MAF from me a while back, perhaps you still remember where I live...
|
j0eyabs
Member # 1026
|
posted
i kinds remember the general area, ill take you up on your offer if the other guy changes his mind. thanks
|