T O P I C R E V I E W
|
GtStang
Member # 11121
|
posted
Jus bought a F cam and running it with ported Gt 40 heads jus woundering if anybody ever ran this cam and did they have any problems with the piston to value clearance on a 302 block thanks Cali Fords really appeticate
|
norcalfiddy
Member # 11207
|
posted
what ratio rockers? best bet is just to check when you do the swap.
|
GtStang
Member # 11121
|
posted
quote: Originally posted by norcalfiddy: what ratio rockers? best bet is just to check when you do the swap.
I'm going with 1.7 with a cobra upper lower. I wanted too see if anybody knows before I put it in and can't return it thanks
|
Camara90
Member # 134
|
posted
Only way to know for sure is to check PTV, it is a pretty easy process. Its always better to be safe then sorry.
|
norcalfiddy
Member # 11207
|
posted
quote: Originally posted by GtStang: quote: Originally posted by norcalfiddy: what ratio rockers? best bet is just to check when you do the swap.
I'm going with 1.7 with a cobra upper lower. I wanted too see if anybody knows before I put it in and can't return it thanks
well all motors are different, mostlikely might hit with the 1.7's. you could try some 1.6's. best thing to do is just to check.
but maybe someone has that setup and can tell you.
|
GtStang
Member # 11121
|
posted
Yea that's why I posted this wanted to see of any one has use this cam with this setup or something similar.. What ca do you guys think I should run?. I want a big can without any problems with piston to value clearance thanks
|
AR_Stang
Member # 10223
|
posted
I was running that cam with 1.6rr with no ptv problems. I heard its close with 1.7rr, it bumps the lift somewhere around the .542 area. The cam did good when I was N/A, I'm still using it with my turbo. [ May 08, 2012, 03:47 PM: Message edited by: AR_Stang ]
|
Wrenchin
Member # 9529
|
posted
quote: Originally posted by GtStang: Yea that's why I posted this wanted to see of any one has use this cam with this setup or something similar.. What ca do you guys think I should run?. I want a big can without any problems with piston to value clearance thanks
I am using GT40X Heads with 1.7s and F303. No issues here, it's close though.
|
ROK5.0
Member # 8589
|
posted
I had a simular set up to urs and I took a chunk off the piston and my gt40 heads. So if I was u id ether jus run 1.6rr of jus do a ptv clearence check jus to be sure like I should've done in the first place...FYI that set up will be nice
|
GtStang
Member # 11121
|
posted
quote: Originally posted by Wrenchin: quote: Originally posted by GtStang: Yea that's why I posted this wanted to see of any one has use this cam with this setup or something similar.. What ca do you guys think I should run?. I want a big can without any problems with piston to value clearance thanks
I am using GT40X Heads with 1.7s and F303. No issues here, it's close though.
Do you think with the 1.6rr I would be okay with the ptv Clarence with the regular ported gt40 heads.? I don't wana put the cam in and not fit and not be able to return it. Or do you know how to check the ptv or how much a shop charges to check?
|
GtStang
Member # 11121
|
posted
quote: Originally posted by ROK5.0: I had a simular set up to urs and I took a chunk off the piston and my gt40 heads. So if I was u id ether jus run 1.6rr of jus do a ptv clearence check jus to be sure like I should've done in the first place...FYI that set up will be nice
Thanks man I hope it's nice I heard of the f cam with the gt 40 heads and it sounds nice jus hoping it fits without shaving anything
|
triple b
Member # 8763
|
posted
check it one slip of the throttle and if your not running the correct springs BAM broken piston or valve
|
FivePTSlow
Member # 7682
|
posted
I used to work at a Mustang shop and whenever we would install F Cam or larger we always had the pistons fly cut just for extra insurance.
|
GtStang
Member # 11121
|
posted
quote: Originally posted by FivePTSlow: I used to work at a Mustang shop and whenever we would install F Cam or larger we always had the pistons fly cut just for extra insurance.
How much do you think they would charge me too cut the pistons for a lil insurance?.
|
Jaejae5.0
Member # 7958
|
posted
friends stock shortblock with edelbrock performers threw in a f cam with 1.7s valves never touched...always smart to check tho..but he had zero problems..goodluck
|
25th coupe
Member # 9743
|
posted
I used to have gt40s anderson cam 512 lift 1.6 rockers and it was fine until I went over 6500 rpms two valves did hit the piston. Fcam 1.7 rockers just to big in my opinion.
|
JZTRK
Member # 7641
|
posted
read this article it will fill your head with information you need http://www.fordmuscle.com/archives/2006/10/93Cobra/
|