T O P I C R E V I E W
|
full throttle
Member # 7220
|
posted
my engine stutters when i get on it, i just installed hedman long tube headers, and after it started stuttering when i get on it. also the engine dies out when it comes to a stop and stuff unless i stay on the gas.. is there anything i can check?
|
Jdub07
Member # 2728
|
posted
Run the codes...but sometimes it takes the computer some time to reset itself when changing air flow.
|
full throttle
Member # 7220
|
posted
how do i runt he code? my car doesn't even have a check engine light.. last owner took it out or something. PLUS i'm hella new to stangs..
|
5.0JerM
Member # 5149
|
posted
check and make sure the o2 sensors are connected
|
Jdub07
Member # 2728
|
posted
Check engine light doesn't need to be on for something to be wrong.
What year car is it?
Run the codes with a code scanner 94+ OBD II 93- use a paper clip or cheap kragan scanner
|
modular
Member # 6599
|
posted
Did you burn a spark plug wire on the headers? Maybe they are backwards? Check firing order and make sure you didnt burn a wire.
|
89goose
Member # 7196
|
posted
quote: Originally posted by full throttle: my engine stutters when i get on it, i just installed hedman long tube headers, and after it started stuttering when i get on it. also the engine dies out when it comes to a stop and stuff unless i stay on the gas.. is there anything i can check?
mine was doing the exact same thing.when at a stop and trying to go it might cut off or sputter- i messed with my throttle cable-and spring on the side of the trottle body- mine was kinda stuck/stiff - so i kept moving it to get it kinda looser 9while the car is off of course) then i did a tune-up plugs, wires, cap & rotor, fuel filter, new tps, cleaned the MAF sensor and the IAR. try first cleaning the MAF sensor- and the IAR and while doing that unhook your battery for at least 30min - it clears the computers memory- thus everything gets reset. here is a link that greatly helped me- thanks to another member here ! http://www.muscularmustangs.com/maintain.php
|
full throttle
Member # 7220
|
posted
thx for the help guys. really appreciated it. but i changed my spark plugs and spark plug wires. my brand new MSD wires were somehow touching the headers, and i guess it didn't spark. i fucked with the idle screw too and now everything is cool
|