T O P I C R E V I E W
|
89_302notch
Member # 5906
|
posted
I was woundering what company makes the best (rigid)K memeber around? It will be used for a daily driver and ocashinall drag. Because I heard some break or crack is it worth getting The tubular K member your thoghts and comments would very well help
|
mustanggt5091
Member # 444
|
posted
PA Racing, AJE, Maximum Motorsports and I hear the UPR isnt all that bad
|
92stangLX
Member # 3252
|
posted
I don't have any personal experience but lots of people swear by the MM and Griggs k-members. You will also have to check for wheel fitmet as some of them move the position of the wheels back or forward.
|
r3dn3ck
Member # 3192
|
posted
GMS and UPR have bazillions of failures, steer clear.
The only ones you'll always see in the list is Maximum Motorsports and Griggs. For a street car MM is a better choice as they're built a little more stoutly. Griggs is lighter and a better choice for race only duty but still a fine streetable unit.
D&D/AJE/PAR... dunno. Not enough data on street driven/daily driven stangs for my taste.
You get what you pay for.
|
PurpleNotch
Member # 2902
|
posted
I use aje but i dont drive my car daily. I like the look and strentgh of the aje. Real good customer service too! AJE
|
Jdub
Member # 2098
|
posted
Are you guys using stock or aftermarket arms? I'd like to run a tubular K and arms, but only if they work with a stock spring setup - I'm not ready for coilovers just yet.
|