T O P I C R E V I E W
|
88saleenclone
Member # 11775
|
posted
So I'm doing a pbr caliper upgrade on a fox and had some questions. can I use sn95 lines and any other tips. So far I already have the sn95 spindles and already grinded alittle off to fit the larger calipers. I also ordered some spacers for the ball joints since the foxs are allitle taller. If you done this upgrade just wanted to know anything to look for or any heads up. Thanks calfords
|
5.0 LsX
Member # 10017
|
posted
if you already have sn95 brakes on, the lines will work, get new copper washers. I like to use the sn95 ball joints and not just spacers
|
KARATExxCHUCK
Member # 12851
|
posted
Nice!!! Good luck man. You will see a huge improvement in braking lol. Just remember that if you go disc all around will have to upgrade your brake booster.
Charles
Merry Christmas
|
88saleenclone
Member # 11775
|
posted
Ill remember to get new washers! I only got the spacers because I plan on upgrading to tubular a arms and k member kit.
|
88saleenclone
Member # 11775
|
posted
I still got drums in the back . I plan on upgrading those too but just wanted to do a simple brake job but ended up with this swap. I can thank goggle for that one lol and happy holidays haha
|
50Reasons
Member # 6452
|
posted
I also like using the sn95 ball joints and it's not a bad idea to replace them while your there anyways
|
FordRyderz510
Member # 6771
|
posted
Yup since your there, replace the ball joints for sn95 and you won't have to deal with spacers for the fox ball joints. Rent the tool if you don't have it and it will make everything easier. I have sn95 spindles and PBR dual piston brakes on mines and it looks great and simple upgrade. Good luck
|