T O P I C R E V I E W
|
2fstfru
Member # 453
|
posted
So far I have the following let me know what im missing.
5 speed trans (94) with bell housing and shifter Fly wheel clutch pedal assembly drive shaft clutch
Will the cross member from a 94 fit a fox body? Wiring will that be needed from a 5 speed car or keep what is on the car now? Thanks for the feed back!
|
2fstfru
Member # 453
|
posted
ttt
|
1991 SSP 331 TWIN TURBO
Member # 7840
|
posted
Missing safety (N) switch wiring harness, u need a fox cross member, block plate, mount, clutch, bolts, shift boot, cable, fox 5 speed driveshaft
Mite be more
And I think you mite have to change something on your trans for it to work with a fox
|
AIRFORMANCE MOBILE AUTO A/C 707
Member # 6243
|
posted
if your putting a 94 t5 in a foxbody i belive the bellhousing and input shaft are longer
|
2fstfru
Member # 453
|
posted
yes they are longer and it will fit.
|
408OUTLAW
Member # 7297
|
posted
i got a cross member
|
BlowN67
Member # 4229
|
posted
http://209.85.173.132/search?q=cache:_NmNXzWF09MJ:projecthp.ford23.com/Documents/Auto%2520to%2520T5%2520Swap.doc+mustang+t5+driveshaft+lenght&cd=29&hl=en&ct=clnk&gl=us
|
Big block 66 f100
Member # 8867
|
posted
quote: Originally posted by 2fstfru: yes they are longer and it will fit.
not true you will have to change the input shaft and a 93 and down bellhousing the 94 has 5/8 of an inch longer bellhousing and input shaft i just did the same swap and found out the hard way i couldnt figure out why in the hell it wouldnt go all the way in
|
Stangs R Us
Member # 4495
|
posted
yessir gotta change that input shaft
|
2fstfru
Member # 453
|
posted
quote: Originally posted by Big block 66 f100: quote: Originally posted by 2fstfru: yes they are longer and it will fit.
not true you will have to change the input shaft and a 93 and down bellhousing the 94 has 5/8 of an inch longer bellhousing and input shaft i just did the same swap and found out the hard way i couldnt figure out why in the hell it wouldnt go all the way in
That is another option. But it will also work as long as you use a 94-95 bell housing.It will set you shifter back about I think 3/8 in.c and I had no issues at all.
|
2fstfru
Member # 453
|
posted
quote: Originally posted by 408OUTLAW: i got a cross member
Good looking out!
|
Big block 66 f100
Member # 8867
|
posted
quote: Originally posted by 2fstfru: quote: Originally posted by Big block 66 f100: quote: Originally posted by 2fstfru: yes they are longer and it will fit.
not true you will have to change the input shaft and a 93 and down bellhousing the 94 has 5/8 of an inch longer bellhousing and input shaft i just did the same swap and found out the hard way i couldnt figure out why in the hell it wouldnt go all the way in
That is another option. But it will also work as long as you use a 94-95 bell housing.It will set you shifter back about I think 3/8 in.c and I had no issues at all.
yea but that puts your driveline 5/8 of an inch on your output shaft not a good idea but its your car have fun
|
mustang928
Member # 2123
|
posted
Make sure you have all the bolts and clips.. When I did my swap that was my major problem, was missing a couple of flywheel, tranny and one of the starter bolts.
Also make sure you have the correct speedo gear in the transmission. And you will need to swap the clutch and speedo cables.
|