T O P I C R E V I E W
|
CobramanPhil
Member # 2170
|
posted
This has probably been asked before, but what is a good combo for a daily driven (5% roadcourse car) with say...462rwhp/490rwhtq? Do you guys run a tremec with a dual centerforce or something...or do you stick with a more clingly clutch that sends the beating to the transmission more?
I was thinking soft clutch...if it blows, but saves the tranny...what is the specs for a tremec..how much of a torque rating does it have?
Thanks for any info...
|
mustangcam302
Member # 2315
|
posted
I would go with SPEC....i have heard nothing but great things about their clutches, the have multiple stages clutches for different power levels....check 'em out:
www.speclutches.com
|
shade-tree
Member # 298
|
posted
I asked around forever for a clutch recommendation for a 300 rwhp 5 liter with an extra 150 from N20 launched on slicks, was told spec-stage III and it's worked fine behind a 250 rwhp 5 liter till now. Kinda on/off ish at first but once broken in it's great. Pedal effort like stock, it's never slipped on me, only tried the 100 shot so far. this is with a t-3550
spec stage II might be adequate for you if you never use slicks, it takes a little extra to not slip with slicks.
|
racercosmo
Member # 1864
|
posted
http://www.ttcautomotive.com/English/products/TR-3550.asp
|