T O P I C R E V I E W
|
ONEQKFIVE0
Member # 1591
|
posted
i just put a new e 303 cam ... and making loud noise both side any body knows this noise ...let me know
|
99gt-UJSTLST
Member # 584
|
posted
what kind of loud noise
did you adjust or torq the rockers on good
|
st5150
Member # 51
|
posted
did you install roller rockers with the E cam as well? If so- they could be banging against the valve covers.
|
shade-tree
Member # 298
|
posted
If I had $1 to wager, I'd say that you didn't adjust your roller rockers properly.
What got me the first couple times is you need to set the rockers to a very small margin of pre-load (I forget, look it up, 0.03 or whatever) and in general using pedestal mount rockers are a pain in the ass to get the pre-load perfect. Watch the lifter. As you're working those fuckers will bleed down and you will make your valvetrain so tight you'll start bending pushrods. When you're on the cam's base circle, just cinch it down to that spec'd preload (watch the pushrod just begin to enter the lifter).
|