T O P I C R E V I E W
|
TOPnotch
Member # 1340
|
posted
302 stock bottom end E-303 cam with 1.7 rockers Anyone ever ran this setup wiht stock heads and stock valve springs. This goes aganist my best judgement But i have a customer that doesn't want to spend any money on better heads right now. And he sure as hell doesn't want to spend any money on the stock heads.
|
95whitegt
Member # 3205
|
posted
i had that on my 89 didn't really notice a whole lota differnce but it sounded sweet
|
two-gun kid
Member # 5891
|
posted
upgrade the valve springs for sure.
|
modular
Member # 6599
|
posted
Kick the rockers for now put the cam in.
|
JohnB
Member # 969
|
posted
Forget the cam, run the rockers. Alot less time in the engine and will run just as good as the cam alone.
|
Maxoctane
Member # 1466
|
posted
done that combo, but i upgraded the springs. the prob you may have down the road is if the engine has a lotta miles the extra lift will eat up the valve seals. the e cam really didn't do much power wise, i may have picked up a tenth or two, may as well put in an x or something from comp cams.
|