Author
|
Topic: anyone ever ran E-303 cam with 1.7rr and stock heads?
|
TOPnotch
¯
Member # 1340
|
posted
302 stock bottom end E-303 cam with 1.7 rockers Anyone ever ran this setup wiht stock heads and stock valve springs. This goes aganist my best judgement But i have a customer that doesn't want to spend any money on better heads right now. And he sure as hell doesn't want to spend any money on the stock heads.
-------------------- The bitterness of poor quality remains long after the sweetness of low price is forgoten!!!
1QWKCHP 1QWKDRP
Posts: 2255 | From: Hayward | Registered: May 2002
| :
|
|
NCALSVT
¯
Member # 3205
|
posted
i had that on my 89 didn't really notice a whole lota differnce but it sounded sweet
Posts: 2162 | From: NOR CAL | Registered: Aug 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
upgrade the valve springs for sure.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
modular
¯
Member # 6599
|
posted
Kick the rockers for now put the cam in.
-------------------- I had no idea that so many people knew everything until I joined this site. I was prolly drunk. Get over it ***BEWARE*** COP CALLERS! Eljefe-Adower!
Posts: 548 | From: sacramento | Registered: Mar 2006
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Forget the cam, run the rockers. Alot less time in the engine and will run just as good as the cam alone.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
Maxoctane
¯
Member # 1466
|
posted
done that combo, but i upgraded the springs. the prob you may have down the road is if the engine has a lotta miles the extra lift will eat up the valve seals. the e cam really didn't do much power wise, i may have picked up a tenth or two, may as well put in an x or something from comp cams.
-------------------- www.maxcarauto.com BUY/SELL/TRADE/FINANCE
Posts: 332 | From: Martinez | Registered: Jun 2002
| :
|
|