T O P I C R E V I E W
|
yesIdid
Member # 58
|
posted
When I shift to neutral, when my rpms are around 2500-3000, from any gear-mostly 2nd and 4th-my car cuts off. I just replaced the IAC hoping that was the problem-NOPE!!! Also, this poblem isn't throwing any codes .
Any ideas??
Thanks!!!!
|
Black94 5.0
Member # 655
|
posted
Do you have gears?...If you have an electronic speedo recalibrator the VSS signal could be to blame...
|
yesIdid
Member # 58
|
posted
Never thought about that... Yes, I do have gears and a Speedcal (elec. recalibration box).
Soooooo. the Speedcal's to blame right? maybe?
|
Black94 5.0
Member # 655
|
posted
It could be a lot of things, but the Speedcal is a good place to start....Check all the connections...
|
yesIdid
Member # 58
|
posted
It's kinda stupid-I must have been in denial-but I noticed this problem after I installed my Accufab plenum/throttle body. So I just probably need a tune, but I don't want to get a tune; it seems like a waste of $ on a n/a car.
If my connections look good, I'll get a tune.
Thanks for the help boss .
|
Black94 5.0
Member # 655
|
posted
The problem you're discribing has nothing to do with needing a "tune"...You would be wasting your money...
Any mods that you've done put back to stock and see if that makes a difference...I'm not telling you to leave it that way and loose the hp you gained, but It's just a way to find out what's wrong with your car...
It's called processes of elimination...
|