Author
|
Topic: Exhaust manifold
|
joeca12
¯
Member # 11651
|
posted
Okay I just bought a 89 5.0 Mustang. Put a new Magnaflow X pipe on it. Went together great other than having to modify the hanger a bit. Started it up, have an exhaust leak. Sound like its coming from the exhaust manifold. Checked and there were 3 bolts missing from the manifold. Was able to seat all but the second to last closest to the firewall. Not sure if it is stripped can't really get the bold started. Any tips or help. Self tapping bolts?
Thanks in advance
Posts: 28 | From: Brentwood | Registered: Feb 2012
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
you might have to loosen up the rest of the headers bolts to get that last one started. the holes probaly arent lined up.
-------------------- 600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
|
joeca12
¯
Member # 11651
|
posted
Thanks. I bought new allen bolts much easier to get in. I will loosen the other bolts and try the other solution. I hope its not stripped. If it is do I have any options? Besides tearing the motor down.
Posts: 28 | From: Brentwood | Registered: Feb 2012
| :
|
|
|
joeca12
¯
Member # 11651
|
posted
3/4"
Posts: 28 | From: Brentwood | Registered: Feb 2012
| :
|
|
American Iron Speed Shop
¯
Member # 6311
|
posted
You sure the last one does not have a bolt broke off in the head?
-------------------- AmericanIronSpeedShop.com
Posts: 435 | From: Loomis Ca (sacramento) | Registered: Dec 2005
| :
|
|
joeca12
¯
Member # 11651
|
posted
Got it in after loosening the others. Still have one sounds like a exhaust leak but can't find it.
Posts: 28 | From: Brentwood | Registered: Feb 2012
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
quote: Originally posted by joeca12: Got it in after loosening the others. Still have one sounds like a exhaust leak but can't find it.
maybe theres a leak where the xpipe meets the headers, make sure the flanges are even on both sides.
-------------------- 600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
Marks93
¯
Member # 11130
|
posted
quote: Originally posted by norcalfiddy: maybe theres a leak where the xpipe meets the headers, make sure the flanges are even on both sides.
Probably is. When I installed MAC headers, which they say are direct bolt on..ha, ya right....I had to have my H-pipe modified just a bit. It was coming in at the wrong angle on the drivers side. [ February 08, 2012, 01:05 AM: Message edited by: Marks93 ]
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
joeca12
¯
Member # 11651
|
posted
I will check again, I need to get this thing smogged today. The leak is minor. Hoping it will pass before pulling the exhause off again.
Posts: 28 | From: Brentwood | Registered: Feb 2012
| :
|
|
fredfifty
Since 9/2010
Member # 10320
|
posted
check the welds on the header for hair line cracks...i ran into this problem on my old car
-------------------- RIP EDSON VELORO IM A NOOB, EXCUSE ME. THANKS. 92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL 62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|