Author
|
Topic: Fuel trim
|
alexdel209
¯
Member # 9239
|
posted
Well my fuel trim is steady at pos 16 I just changed my fuel pump and filter cleaned my injectors my fuel pressure is good my Maf is good and my o2 sensors are switching and I have no vacuum leaks
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
Adam5.0
¯
Member # 6995
|
posted
ect, maf, o2 sensors, air temp senor are the major sensors that control fuel trim. hook a scanner with data stream and go from there, if you already havent. I think you have since you know where your fuel trim is at.
-------------------- want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
yeah i have a snap on scanner at work but yeah my maf and o2 sensors are good my ect also but my fuel trim is steady at pos 16 i have no vaccuum leaks my only thought is maybe my pupm isnt pumping enough its a stock replacement but all i have is all boltons intake,longtubes,programmer,pullies throttlebody
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
look harder for vacuum leaks, mine was similar to that and I found the EGR gasket was ripped so I could never find it at idle...
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
alexdel209
¯
Member # 9239
|
posted
ok will do but i mean ive gona through a bunch of cans of brake clean looking for it its just getting frustrating you know
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
Adam5.0
¯
Member # 6995
|
posted
did this just start hapening? try taking out the programmer and put the stock tune back in. as stated before look again for vacuum leaks, exhaust leaks
-------------------- want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
the thing is i also smoke tested it and nothing and i also tried taking off the programmer nothing changed it goes higher at idle then lower when driving so i know there is a problem somewhere
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
I could not find my leak until I pulled the egr off the intake when I had given up and was just going to replace all the intake gaskets...
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
alexdel209
¯
Member # 9239
|
posted
well that does make some sense because i did have longtubes put on not too long ago but i had sprayed around the egr and didnt make any change ill look into it tho
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote: Originally posted by alexdel209: well that does make some sense because i did have longtubes put on not too long ago but i had sprayed around the egr and didnt make any change ill look into it tho
how far are the o2 down stream an what postion are the in
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
well i have longtubes so they are a little farther downstream than normal
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote: Originally posted by alexdel209: well i have longtubes so they are a little farther downstream than normal
no shit if there to far downstream or not in the right postion the will give all kinds of problem an did use os extenders
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
Yeah I have the extended but they are switching fine I even put in new o2s because I got a slow response code a hole ago I'm thinking some kind of vacuum or exhaust leak but. Smke testedit and dint find any
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote: Originally posted by alexdel209: Yeah I have the extended but they are switching fine I even put in new o2s because I got a slow response code a hole ago I'm thinking some kind of vacuum or exhaust leak but. Smke testedit and dint find any
are use the scanner to get or maf an o2 values
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
the scanner and a dvom maf is good also 02s are brand new and no manifold vaccum leaks that ive found and i smoke tested and used hella brake cleaner
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote: Originally posted by alexdel209: the scanner and a dvom maf is good also 02s are brand new and no manifold vaccum leaks that ive found and i smoke tested and used hella brake cleaner
what your baro reading
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
alexdel209
¯
Member # 9239
|
posted
14% load at idle havent looked at baro pressure but will tom also goin to smoke test the exhaust im thinking a upstream exhaust leak
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|
alexdel209
¯
Member # 9239
|
posted
ok here are my readings at idle today when the car was warmed up long term fuel trim bank 1 pos 24 longterm fuel bank pos 21 pulse width 2,8 both sides maf 4.22 grams .73 volts fuell pressure 40 lbs load 13% throttle pos volt 1.01
i have checked for vacuum leaks and exhaust leaks my egr workks and is not leaking.changed the fuel pump and filter and the 2 front o2 sensors. and a new iac motor kind of confused
Posts: 1087 | From: 209, ca | Registered: Jun 2009
| :
|
|