T O P I C R E V I E W
|
1994steeda
Member # 6127
|
posted
hello,
PLEASE READ ALL!
Im sell a st of Edelbrock 6025 Performer Aluminum heads(the smaller ones, they are in great shape, minus two of the cylinders need new valve seats, they leak in the intake valve.(look at pictures) I had them for a while and never got around to rebuilding them and putting them on my car. I bought them for $350, and i was told they were damage. I took them to my buddy's shop and he said they only needed two valve seat, which a machine shop could do fairly cheap and that they are 100% rebuilable. They are NOT complete, i basicly just bought the heads,Rocker arms, and springs, minus everything else.
Asking $350 obo call me or pm 408-329-2599 ismael
DAMAGED VALVE SEATS
[ November 21, 2010, 10:47 AM: Message edited by: 1994steeda ]
|
1994steeda
Member # 6127
|
posted
by the way the red paint on the first picture is from my buddies machine shop. He did that to remind me that those were the only valve seats that need replacing. Thanks
1994steeda
|
M&M Performance *BlownMach1*
Member # 5400
|
posted
unless u have the valves for these heads then these heads will cost more to but back together then a NEW set would be. they use a 1.90 intake valve, not a 1.92...so edlebrock is the only one i could find that had the valves and if u i recall right i paid somewhere around 300 for the valves alone, now add springs, retainers, and keepers plus valve seats fixed...ouch!
i have springs, retainers and keepers at my shop and would be willing to buy them if u have the valves for the heads..that way 350 plus im guessing 400 at the machine shop...thats worth it to me..hell u can buy these heads off this site ready to run between 650-750! lmk if u can get the valves.
* i looked it up its 335.20 plus shipping for the valves new..best thing for these heads is someone who already has a set and the castings are bad(warped/cracked) then he can swap over into these! cost effective wise i mean! [ November 20, 2010, 06:43 PM: Message edited by: M&M Performance *BlownMach1* ]
|
1994steeda
Member # 6127
|
posted
i threw away the valves, there was different valves throughout the heads. And some valves had damage.
My buddy said its really easy to "up grade" these i could remove all the valve seat and buy bigger ones with bigger valves and have the 2.02 size,plus a good port and make really good power.
As for " valves alone, now add springs, retainers, and keepers plus valve seats " they are NOT an arm and a leg, and they dont not have to be NOS Edelbrock parts.
My buddy just finished ChevyEater's 331 with Edelbrock heads, which someone on this board put together first and didnt check valve/piston clearance. Long story short heads had to be rebuilt and not everything was NOS Edelbrock, and heads worked out great.
ALL PM's repiled to and all texts/calls aswell They will go on ebay by Sunday night, Thanks
1994steeda
|
1994steeda
Member # 6127
|
posted
Firm $200 first one with the money gets them!
Both my cars were stolen early this morning, could really use extra cash to get my daily driver fixed asap.
Yes $200 firm!!!!
1994steeda
|
Brokn Nx
Member # 8526
|
posted
quote: Originally posted by 1994steeda: Firm $200 first one with the money gets them!
Both my cars were stolen early this morning, could really use extra cash to get my daily driver fixed asap.
Yes $200 firm!!!!
1994steeda
TTT for a dude with the worst luck ever!
F all the thieves! [ November 21, 2010, 02:55 PM: Message edited by: Brokn Nx ]
|
1994steeda
Member # 6127
|
posted
dude flaked still for sale......
1994steeda
|
Moderator
Member # 6395
|
posted
How much to rebuid total?and as a member of this board I feel that I should help out and atleast .TTT ,sorry to hear about ur 2 cars..all of us here on cafords will be watching out,also if there is any info on these thieves feel free to pm me or any one from our staff
|
cali95gt
Member # 8940
|
posted
Damn if only I didn't buy my headers the other day If they are around on Friday I might just grab them and redo them completely.. free bump bro
|
M&M Performance *BlownMach1*
Member # 5400
|
posted
i sent another pm..awaiting directions to send money!
|
1994steeda
Member # 6127
|
posted
All Pms replied too, Thanks
1994steeda
|