T O P I C R E V I E W
|
SVT GI
Member # 8997
|
posted
Up for sale is a C-6 Transmission that I used in a 9 sec 1/4 mile BBF Mustang. It has 20 - 1/4 mile passes and about 5 miles of street time since the tranny was completely built. It is fully rollerized (bearings), bands are 1/2 wider over stock, billet aluminum "Super Servo", upgraded B&M valve body that still retains full auto capabilities with the use of the vacuum modulator. At the time of build the tranny was completely gone through with all new parts, input shaft, pump, seals, ect. It is rated to 1200hp. Also included is a Lokar flex dip stick and SFI tranny blanket.
The converter is an Art Carr 9" race converter with a stall of 4500 and flash to 4800. It also has anti ballooning plates for nitrous applications. The little time that it was ran on the street, this set up had perfect street manners. Of course your engine will determine stall with this set up.
I am selling because the engine did not last as long as this set up and I decided to change my direction with the car so this has to go. This tranny and converter are in PERFECT working order and you will not be disappointed. I went through 2 other tranny's before I could find one that would hold together and this is it. There is close to $3000 in this and it only has 20-1/4 mile passes and has never seen over 160 degrees. $1600 OBO come and pick up!
 [ June 10, 2009, 10:53 PM: Message edited by: SVT GI ]
|
Duncan Motors
Member # 7045
|
posted
would u sell just the converter
|
SVT GI
Member # 8997
|
posted
Possibly, If I can find somebody else to take the tranny. Make an offer.
|
SVT GI
Member # 8997
|
posted
ttt
|
DVUS PNY
Member # 9058
|
posted
like the blk.vert you sold... Honest Abe!!!
|
SVT GI
Member # 8997
|
posted
quote: like the blk.vert you sold... Honest Abe!!!
??? Whats that mean?
|
|