T O P I C R E V I E W
|
v-town coupe
Member # 2771
|
posted
this motor came out of my 90 conv. the car was rearended and ended up parting it out and im thinking of selling the motor just so i can get my project finally finished the motor was bought from the ford dealer as a stock replacement 225hp motor for $2099 and then i pulled the stock heads and replaced them with the smog legal ped. mount afr 185 cc cnc'd heads the motor has less than 250 miles on it. the came is stock we were looking to get a custom ground or an anderson cam after the vortech went on. i will pull the heads or the bearing caps for SERIOUS buyers only! so u cann see how clean it is the main and rod bearings have almost no wear! the motor comes comes with timing cover , oil pan , water pump and balancer looking at any offers over 2100 bucks thanx
btw these are the heads that made 455hp out of a 10:5:1 302 with a comp xe282hr and a victor jr
heres the link
http://www.airflowresearch.com/185sbf_sh.php
http://www.airflowresearch.com/ford_dyno.php
|
v-town coupe
Member # 2771
|
posted
actually the dyno test was done with only 10:1 compression
|
modular
Member # 6599
|
posted
So its a stock block with AFR heads for 2100? or is the blower included? Your info is a little confusing. Yes, Im tarded.
|
v-town50
Member # 4920
|
posted
ttt
|
v-town coupe
Member # 2771
|
posted
quote: Originally posted by modular: So its a stock block with AFR heads for 2100? or is the blower included? Your info is a little confusing. Yes, Im tarded.
im just looking for the best offer above 2100.no its a stock short block with afr 185's on it . blower has been gone. thanx
|
v-town coupe
Member # 2771
|
posted
quote: Originally posted by v-town50: ttt
ty u should buy it so ur car will
|
v-town coupe
Member # 2771
|
posted
short block has been sold!!! will start a post for heads
|