|
Author
|
Topic: Parting out 89 coupe 408 c4 shell 500
|
1SLOWLX
¯
Member # 558
|
posted
 
 
I think this may be the last one I part out for a while and like always I will give cafords first crack at everything then I will post it everywhere next week. I got a crap load on my plate but who knows taking offers on parts I will make prices up in the next few days some things have prices other dont
I am going to start like this
motor 408 fully forged rotating assembly unknown engine builder its never been fired I personally would go through check clearances etc but choice is up to the buyer
motor has girdle
windage tray
canton pan
forged crank
forged h beams 6.2"
forged pistons probe dished pistons
no cam or lifters head studs included 2200
Msd dist new just dropped in never used 200
full aeromotive eliminator kit tank rails lines regualtor pump pre filter after filter never seen fuel as the car never ran sale pending
trick flow box intake for 351
lower is stage two ported by ford performance solutions 575
moroso electric water pump 200
Pa supercomp C4 transbrake
4500 stall
aluminum ds
everything to make it fit
1800
kooks headers 2" primaries and 4 inch collector header for 9.5 351 tfs R head. I have all in 4" X pipe piping with 4 inch mufflers to go with it all new just bolted up 650
I am sure there is more lots of other things I just have to tear it down and I will list as they come
[ January 04, 2009, 08:01 PM: Message edited by: 1SLOWLX ]
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
87droptop50
Go Giants!
Member # 7185
|
posted
lmk when the roller ready for sale
--------------------
HighSpeed Motorsports
87Mustang Gt Conv kurgan tuned
03Harley F150 #5023
69El Camino SS396 -sold
99 f350 7.3 DRW
Posts: 3855 | From: SF | Registered: Oct 2006
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
Roller will be a shell there is just too much in suspension (unless you are paying for it all) if you want a real chp shell bring a trailer some friends and cash we can talk roll cage in it looks like trash.
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote:
Originally posted by 1SLOWLX:
Roller will be a shell there is just too much in suspension (unless you are paying for it all) if you want a real chp shell bring a trailer some friends and cash we can talk roll cage in it looks like trash.
What is in the rear for suspension? PM me Albert.
Dan
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
saleen_freak
¯
Member # 6521
|
posted
What color is your trickflow intake manifold? ANd how much do you want for it? Is it complete with all the gaskets and hardware? pm me Thanks!!!
Posts: 211 | From: Sacramento | Registered: Feb 2006
| :
|
|
87#184saleen
¯
Member # 6276
|
posted
im intrested in 90mm tb and the kooks headers
Posts: 1455 | Registered: Dec 2005
| :
|
|
jmcclesk
Moderator
Member # 1355
|
posted
Holy crap another one!!!!!! what do you want for the 408 shortblock?
[ December 17, 2008, 01:52 AM: Message edited by: jmcclesk ]
--------------------
Ford trained ASE master tech.
Posts: 4024 | From: marrysville | Registered: May 2002
| :
|
|
87droptop50
Go Giants!
Member # 7185
|
posted
pm sent
--------------------
HighSpeed Motorsports
87Mustang Gt Conv kurgan tuned
03Harley F150 #5023
69El Camino SS396 -sold
99 f350 7.3 DRW
Posts: 3855 | From: SF | Registered: Oct 2006
| :
|
|
4MY8TERS
¯
Member # 7840
|
posted
How much for the complete shell, body doors int fenders bumpers lites etc, no suspension
--------------------
1985 Notchback-393w Vortech
1991 Convert Lx-H/C/I-Vortech
1984 T-Top 306-H/C/I
Posts: 2337 | From: THE GOLDEN CITY AKA SFC | Registered: Aug 2007
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
manifold is looks grey it has everything it's basically new just bolted up make offer please keep the lowballs to youself
Throttle body with the little egr plate I'll take 200 for
Kooks headers selling with the exhaust piping and muffles as I have no use for them 650 headers alone were 720
408w depends on you want it ie leave the solid cam in there with the link bar lifters it's a custom grind from fps rotating assembly was 1550 alone
Could has no interior I was going to be a drag car reg is out six years have the pink it's clean make me an offer and bring lots of peopele and a trailer to get it when I'm ready
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
94 N.C.F GT
TEAM PLATINUM
Member # 8722
|
posted
im intrested in the exsuast pm sent
--------------------
TEAM PLATINUM
87LX:(D D) ORANGE coupe
94GT:(427) Its a BEAST on the streets but in the garage it stays ASLEEP. N/A
Posts: 1313 | From: RICHMOND/sanpablo | Registered: Oct 2008
| :
|
|
LoveMy 88Gt
¯
Member # 8822
|
posted
How much are u looking to get for the 408? also would my vortech sc from my 302 bolt on to it? thx
Posts: 22 | From: redding | Registered: Dec 2008
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
All depends on how you take the 408. It has an unknown builder but if fully forged. It has a solid roller cam in it right now with link bar lifters canton pan main girdle etc
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
87#184saleen
¯
Member # 6276
|
posted
quote:
Originally posted by LoveMy 88Gt:
How much are u looking to get for the 408? also would my vortech sc from my 302 bolt on to it? thx
i think you have to modify your brakets
--------------------
R.I.P DAD 3/5/36 - 6/2/07
2004 PORSCHE CAYENNE S on 22”
2013 PORSCHE Panamera on 21”
1987 SALEEN #184
Member of R H P
Posts: 1455 | Registered: Dec 2005
| :
|
|
kennebellgt
¯
Member # 8395
|
posted
dude everytime you post i literally say WTF, dude what do you do? where do you get all these parts? im stumped what do you do for work lol i have trouble just getting a pair of heads and you seem to pull them out of your ass like its nothing, i love it wish i could do all that ![[Smile]](smile.gif)
--------------------
just trying to fight the SN-95 demons
PS3 NAME- kennebellgt
Posts: 830 | From: Sacramento | Registered: May 2008
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
quote:
Originally posted by kennebellgt:
dude everytime you post i literally say WTF, dude what do you do? where do you get all these parts? im stumped what do you do for work lol i have trouble just getting a pair of heads and you seem to pull them out of your ass like its nothing, i love it wish i could do all that
Cash is a good thing right now and people are hurting for it and I needed some new tires for my 67 ![[Wink]](wink.gif) . Good thing I have a nice amount stashed away just look at it this way you guys get good stuff at for less $. The avenger heads I have are pretty nice and are damn cheap.
[ December 19, 2008, 07:26 AM: Message edited by: 1SLOWLX ]
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
Don
CAFords OG
Member # 938
|
posted
I need a 4.56 built 8.8 rearend. What is in this car?
--------------------
06 sti 2.5
95 GT 5.2
Posts: 962 | From: Manteca, CA | Registered: Feb 2002
| :
|
|
kennebellgt
¯
Member # 8395
|
posted
yeah i'd like to get them heads but money is tight at the moment, but i'll be sure to hit you up when i need heads
Posts: 830 | From: Sacramento | Registered: May 2008
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
don its 5 lug with rear disk. The rear has 4.10's 31 spline axels alurn pro series mac cover and the axel tubs have been welded up
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
|
|
Cm4hawks
¯
Member # 5231
|
posted
Pm sent
--------------------
2007 Ford Expedition
2004 Dodge Ram 2500
Posts: 1818 | From: Pacheco CA | Registered: Jan 2005
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
Pics of your parts will be comming I am on my way to finish it and take the rest apart let me know what you want a pic of
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
Don
CAFords OG
Member # 938
|
posted
how much for the rearend?
--------------------
06 sti 2.5
95 GT 5.2
Posts: 962 | From: Manteca, CA | Registered: Feb 2002
| :
|
|
Cm4hawks
¯
Member # 5231
|
posted
LOL i am waiting for the same answer
quote:
Originally posted by Don:
how much for the rearend?
--------------------
2007 Ford Expedition
2004 Dodge Ram 2500
Posts: 1818 | From: Pacheco CA | Registered: Jan 2005
| :
|
|
1SLOWLX
¯
Member # 558
|
posted
ttt any offers on the Shell? I would hate to bring my sawaz out of retirement . Anyone need body pieces maybe the sawaz will come out poor chp car oh well
--------------------
Built Tuff with your stuff ;)
Posts: 5231 | From: bay area | Registered: Nov 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
