|
Author
|
Topic: battery disconnect?
|
Secnd2nun64
¯
Member # 1431
|
posted
 
 
I'm planning to move my battery/starter solenoid to the trunk. Can I run one of these disconnects to the drivers seat and still be okay at the track? I'd rather not drill a hole to the outside of the car to run a switch.
http://www.summitracing.com/parts/lok-1330022
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
Has to be at the rear of the vehicle.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
I have mine hidden by the license plate, plate is mounted to about 3-4" worth of spacers to give the switch room behind it. I take my plates off at the track anyways, and this way it's in an easy spot and is clearly marked.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
sic70stang
CAFords OG
Member # 4347
|
posted
Make sure it kills the altanator also. They will rev the car to 2000+ RPM and make sure it shuts off with that switch
--------------------
The anti-crew
1987 rolling safety violation.
Posts: 6943 | From: California | Registered: Jul 2005
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Anyone have pics of how they ran theirs? already have my battery in the trunk without a disconnect
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
I guess I can get another tail light lens and drill it for a rod that's connected to the switch for when I go racing. It only takes a few minutes to change out a lens. Probably the easiest way so I don't have a rod sticking outside the car all the time.
I'm going to put the starter solenoid in the trunk and fuse the alt wire on each end that way I don't have 12 volts flowing in case it grounds out in a wreck. Good call on the alt wire being hooked up to the cutoff, I bet that gets overlooked.
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
sic70stang
CAFords OG
Member # 4347
|
posted
I see many people fail tech from the alt keeping the car running. Lol
--------------------
The anti-crew
1987 rolling safety violation.
Posts: 6943 | From: California | Registered: Jul 2005
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote:
Originally posted by sic70stang:
I see many people fail tech from the alt keeping the car running. Lol
An that's why I don't run a alt.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by 70stang351w:
Anyone have pics of how they ran theirs? already have my battery in the trunk without a disconnect
very old pic (2007?), I install heatshrink up to the ends of each connection later.
switch turns off the feed from the 3g alternator stud before it goes to the battery in the trunk. From the switched side that large 0/1 awg wire goes to the starter solenoid which powers the starter, and the starter solenoid has an 8awg wire lead that goes to the fender solenoid which powers the rest of the cars needs.
Pretty simple.
[ 2015-05-26, 12:09 PM: Message edited by: Blind ]
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
Slick setup. I ordered all my stuff over the weekend minus the tail light lens. Need to find an original one. I went with a Taylor aluminum box, flaming river disconnect, 0/1 gauge wire and a bunch of misc items to fuse the alt wire. Hopefully will have all the parts by this Friday to make the conversion.
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
Getting close to driving it again!
[IMG]  [/IMG]
[IMG]  [/IMG]
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Very nice. did relocate the solenoid also?
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
Secnd2nun64
¯
Member # 1431
|
posted
I got a new starter that had one on it so I eliminated the one on the fender wall. I never trusted those old style ones. If your battery is low, they can get stuck into the on position and start smoking. Didn't want that anywhere near my gas tank! lol
Posts: 1460 | From: CA | Registered: Jun 2002
| :
|
|
70stang351w
¯
Member # 9948
|
posted
was planning on gettinga ford racing start with the built in solenoid when i do my FMX to aod swap did you ditch the Old Solenoid for a junction or eliminate it all together just been reading most still leave the old one and use its as a junction or Relay?
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
