|
Author
|
Topic: Redding is done for the year so is my spec stage 3 LOL
|
2stangs69-91
¯
Member # 1951
|
posted
 
 
Despite slipping clutch problems I managed a new best(not buy much). I ran a 11.17 at 123. the 123 was a result of me hitting my factory rev limiter before the end when I was about Dead even with another mustang. I did get my best 1/8 mile MPH I hit 99.78. It was rolling on pretty good when it shut off, the car I raced ran through at 130 and he wasn't pulling me. A friend of mine in a 69 Cammaro with his new alch blower set up(he got from Doug Reed)ran 7.96 at over 170 on ET streets. ![[Eek!]](eek.gif) After i figure out what to do with my clutch set up and buy some taller tires I will see you guy's in Sac.
[ October 31, 2004, 08:14 AM: Message edited by: 2stangs69-91 ]
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
That car is really bookin. What was the 60ft on you 11.17 pass and with what tires? That 1/8 mile MPH is awesome! Once you get a clutch that hooks and bring it to Sac that thing is REALLY going to fly. Make sure you let me know when you're coming down, I'll come out, (and leave the car in the garage ![[Wink]](wink.gif) )
[ October 31, 2004, 08:31 AM: Message edited by: Yellow94GT ]
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Wow! Way to go Mike! Look forward to seeing it cut loose at Sac. ![[worship]](graemlins/worship.gif) ![[burnout]](graemlins/burnout.gif)
--------------------
'92 LX T5
Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
I had a 1.75 60 foot on my 26-10 ET streets. the 1/8 mile ET was 7.31. It was still spinning the tires in first and second making that tire shreading screch the mustangs seem to have when running ET streets. My spec cluth was new when I came down to Sac in the first part of the year for the all fords race. I expected it to last a little longer then it did ![[Confused]](confused.gif) Thanks for the good words. I think I am going to go with the ET drag radials that are 27 inches tall. My et streets are pretty thin now. I am Going to try to hold out on comming to Sac until we can get a sub 1000 foot day LOL
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote:
Originally posted by 2stangs69-91:
I had a 1.75 60 foot on my 26-10 ET streets. the 1/8 mile ET was 7.31. It was still spinning the tires in first and second making that tire shreading screch the mustangs seem to have when running ET streets. My spec cluth was new when I came down to Sac in the first part of the year for the all fords race. I expected it to last a little longer then it did Thanks for the good words. I think I am going to go with the ET drag radials that are 27 inches tall. My et streets are pretty thin now. I am Going to try to hold out on comming to Sac until we can get a sub 1000 foot day LOL
Wow, GET THAT THING TO HOOK!!!
I would expect low 1.6's or high 1.5's at the very least from that monster
I know what weather your talking about for Sac. I'm trying to have my car ready for when those days come also ![[Big Grin]](biggrin.gif)
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
bunchmyfunky
CAFords Drag Racing Mod
Member # 360
|
posted
Damn Mike that car is moving!!! That sucks about the clutch any thoughts on what one your going to try next.
Posts: 2433 | From: Vacaville | Registered: Jul 2001
| :
|
|
Red C5
¯
Member # 1561
|
posted
Very nice.
FWIW, my spec stage 3 started slipping after about 5 or 6 passes. I think that clutch is junk.
Posts: 803 | From: Bay Area | Registered: Jul 2002
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
what clutch assy did you go with? I need to do something?
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
Red C5
¯
Member # 1561
|
posted
I'm going to dry the Mcleod twin disk next. Actually the RAM clutch I had before the spec lasted almost a full year of going to the strip and daily driving.
Also, it was cheap.
[ October 31, 2004, 08:38 PM: Message edited by: Red C5 ]
Posts: 803 | From: Bay Area | Registered: Jul 2002
| :
|
|
season'd 88
¯
Member # 169
|
posted
[ November 06, 2006, 01:13 AM: Message edited by: season'd 88 ]
Posts: 1383 | Registered: Feb 2001
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
I ran a Zoom Purple Setup in my stang and made at least 200 passes in that car AND before it was in my car it was in 93LX342's 86 before i got a holdof it.He isnt exactly nice to a car let alone a clutch
Anyhow at the track I would leave at 5000 rpm on every pass wheels up with a 1.58 60ft on motor with that clutch.I went thru about 20 trannies but never looked twice at that clutch.May be something to look into.....
[ November 05, 2004, 01:14 AM: Message edited by: HaulinAssMaro ]
Posts: 22509 | From: Sacramento | Registered: Nov 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
quote:
Originally posted by HaulinAssMaro:
I ran a Zoom Purple Setup in my stang and made at least 200 passes in that car AND before it was in my car it was in 93LX342's 86 before i got a holdof it.He isnt exactly nice to a car let alone a clutch
Anyhow at the track I would leave at 5000 rpm on every pass wheels up with a 1.58 60ft on motor with that clutch.I went thru about 20 trannies but never looked twice at that clutch.May be something to look into.....
Is that a disk style clutch or does it have pucks? Any chatter?
20 trannys! LOL
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
93LX342
¯
Member # 1793
|
posted
i think the plate is like a centerforce.cant remember.that clutch took alot of abuse.
--------------------
06 f250 superduty with some mods.
95 f250
www.unlimitedracing.com
Posts: 1036 | From: san jose | Registered: Sep 2002
| :
|
|
93LX342
¯
Member # 1793
|
posted
in my 342 set up i ran a king cobra pressure plate and centerforce disk.seemed to work really good.beat the crap out of that one also.stage 3 with 12.20 @110 306 broke after 2500 miles.
--------------------
06 f250 superduty with some mods.
95 f250
www.unlimitedracing.com
Posts: 1036 | From: san jose | Registered: Sep 2002
| :
|
|
stanger91
¯
Member # 397
|
posted
Doug Reed = the man
--------------------
E.T 12.314@126.300
Posts: 778 | From: Sacramento, CA | Registered: Aug 2001
| :
|
|
mustanggt5091
All I need is.....
Member # 444
|
posted
wow, I have heard great things about Mcleod disc clutches, but i will have to look into this purple monster you speak of ![[patriot]](graemlins/patriot.gif)
--------------------
88 GT 357w (SOLD):(
06 Limited Edition R6 !!!!!
Posts: 2353 | From: Fairfield / Santa Rosa , Ca | Registered: Sep 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
