Post A Reply
read DMs/my profile
login
|
join CAFords
|
search
|
faq
|
»
Northern California Ford Owners
»
Automotive
»
Drag Racing
»
Infineon Drags on 2/20
» Post A Reply
Post A Reply
Login Name:
Password:
Message Icon:
Message:
HTML is not enabled.
UBB Code is enabled.
[QUOTE]Originally posted by cummins: [QB] [QUOTE]Originally posted by Jmir018: [qb] i haven't even installed the window switch. the toggle swith works fine.. from what i hear.. if you have it set up as in the graph i posted above, then the ground from the wot should be the one connected to the yellow wire.. pd, what do u think, on that graph none of the terminals go to ground. [/qb][/QUOTE]See my above post where I laid out how I would do it. Here is what I wrote just in case you don't want to read it. [i] "85 of relay to wot switch to grounding wire from the window switch. One side of the wot switch goes to grounding wire from the window switch and the other side goes to 85 of the relay." [/i] And here is what I wrote in regards to your grounding question: [i]"Basically the window switch will provide a ground at a desired rpm and this will finalize the loop and complete the circuitry in order for your nos to work."[/i] So yes there appears to be no ground for the terminals but the window switch will provide the ground for these terminals when you reach that desired rpm [/QB][/QUOTE]
(
how?
)
Instant Emojis
Instant UBB Code
What is UBB Code?
Options
Disable smilies in this post.
*** Click here to review this topic. ***
Questions/Requests/Suggestions? email CAFords
Fueled by
Ford Mustang Owners
on CaliforniaFords.com