T O P I C R E V I E W
|
hidnn.o.s.
Member # 1219
|
posted
Anyone see the silver lx at Sears on street tires?
|
PunkINa5.SLOW
Member # 10
|
posted
I ran a 16.1@109 once
street tires go figure
13.4@120 is moving baby
|
hidnn.o.s.
Member # 1219
|
posted
532 at the wheels moving
|
st5150
Member # 51
|
posted
What's his combo?
|
hidnn.o.s.
Member # 1219
|
posted
He posts on here. his sn is like "forced 331" or something.. Well, he looks on here, hardly ever posts anything. He told me to put what his numbers were.
To the best of my knowledge he has a 331 with all the good internals, aluminum edelbrock heads (un ported), cobra intake(un ported), and an S trim shoving 14 pounds of boost at the motor. 42 pound injectors, 255 in tank, etc, etc...
We took it to RPM the other day to see what it put to the wheels and were shocked with 500 horsepower. We gave half a turn to the fuel pressure regulator and got 532 to the wheels the next pull. The last pull we gave it another little turn and it dropped to 520 so we turned it back and left. He will probably take it to Apex or something for a dyno tune eventually. It is a clean car, but rarely leaves his garage......
|
st5150
Member # 51
|
posted
Which edelbrock heads? What cam?
|
hidnn.o.s.
Member # 1219
|
posted
I beleive it is a custom grind. I know he does not like the cam for drive ability, mainly below 1800 RPM's.
Yes, edelbrocks.
|
hidnn.o.s.
Member # 1219
|
posted
Not sure which Edelbrocks, he got the newest ones they had. Purchased about 2 years ago I think. He used them off of his old combo.
|
hidnn.o.s.
Member # 1219
|
posted
My mistake, he has a trick flow R intake, but the heads are the bottle neck in the motor.
|
st5150
Member # 51
|
posted
Sounds like he has some Victor Jr heads on that car. Can you ask him to find out for sure? Some ET drags/streets will make the car a whole lot more fun to drive down the track
|
JOSH
Member # 979
|
posted
I seen him run it looked like alot of work/fun. He spun to almost half track.
|
Blownhatch
Member # 167
|
posted
What was the fuel pressure at?
|
hidnn.o.s.
Member # 1219
|
posted
No one knows for sure. Guage isn't working. The isolator needs to be bled or something.
|
281n/a
Member # 1465
|
posted
he should be trapping higher than that with 532rw that guy jim vaccaro who has the 2000 gt with a procharger dynoed 550 rwhp ran a 10.3 129
|
Blownhatch
Member # 167
|
posted
He was on street tires, spin tires down track=MPH is effected.
|
hidnn.o.s.
Member # 1219
|
posted
Heavily affected from what I heard...
|
hidnn.o.s.
Member # 1219
|
posted
quote: Originally posted by st5150: Sounds like he has some Victor Jr heads on that car. Can you ask him to find out for sure?
Not the Victor Jr. heads. They are the older 1.90 ones he said.
|
CHARGED88
Member # 1089
|
posted
thats my boy tony, hes a cool guy. if you do see this post tony, its mike, the guy you sold the notch to. good luck with the car man. peace
|
st5150
Member # 51
|
posted
quote: Originally posted by CHARGED88: thats my boy tony, hes a cool guy. if you do see this post tony, its mike, the guy you sold the notch to. good luck with the car man. peace
Hey, is this Tony with the clean silver LX sporting the Steeda wing?
|
CHARGED88
Member # 1089
|
posted
yup, same guy
|
hidnn.o.s.
Member # 1219
|
posted
Yes, that is Tony. He lives a few minutes away and has forgotten his password to post here. He tried replying a few times...
|
hidnn.o.s.
Member # 1219
|
posted
LOL, you have the notch now. Small world. How is everything running?
|
st5150
Member # 51
|
posted
quote: Originally posted by hidnn.o.s.: Yes, that is Tony. He lives a few minutes away and has forgotten his password to post here. He tried replying a few times...
I remember him. I think I bought 4 ten holes+tires off of him like 3 years. Ago. Tell him he's in luck, I know the guy that runs the message board. Can you give me his email address and and sign on name? I'll take care of him
|
90GT
Member # 3
|
posted
I have seen that car a few times in the past at sears and sacramento. That is a clean lx.
|
hidnn.o.s.
Member # 1219
|
posted
quote: Originally posted by st5150: quote: Originally posted by hidnn.o.s.: Yes, that is Tony. He lives a few minutes away and has forgotten his password to post here. He tried replying a few times...
I remember him. I think I bought 4 ten holes+tires off of him like 3 years. Ago. Tell him he's in luck, I know the guy that runs the message board. Can you give me his email address and and sign on name? I'll take care of him
Thanks, just talked to him and his screen name is forced331. His email address is steeda331@sbcglobal.net. He remembers you as well Sawson.
|
st5150
Member # 51
|
posted
Cool, I had no idea that was his name on here. I had the message board software send his log-in info to: steeda331@sbcglobal.net http://www.californiafords.com/help.htm should take care of future log in problems.
|