T O P I C R E V I E W
|
02mustang5.4
Member # 14004
|
posted
I INSTALLED STAGE 2 cams on my buddies gt and now the car won't fire up I that it maybe jumped a tooth in the timing but I tool the timing cover off and the timing marks are good
|
Egocentric
Member # 9529
|
posted
Cam position sensor? Plenty of wiring and sensors can get bumped or destroyed while doing work like that, do a full once over of all of it before you tear back into the cam's.
|
02mustang5.4
Member # 14004
|
posted
Thanks for the fast respond and I put a new crank sensor and a new can sensor and still nothing I'll crank it over and it sounds like it wants to fire up bit doesn't there's fuel I purged the fuel line and plenty of fuel came out
|
Autumnstang97
Member # 6111
|
posted
Is there a fuel rail pressure sensor on that car? I had that problem and I ended up flooding the crap out of the car before I replaced that part. Maybe that? If not go up and down the wiring harness and see if anything is unplugged.
|
Blind
Member # 3052
|
posted
so there's fuel, have you done a compression test and checked for spark?
|
02mustang5.4
Member # 14004
|
posted
I found the culprit it was my error turned out I put in all the coil packs in without the spring the connects the coil pack to the actual spark plug lol thanks for all the Intel guys she fired right up sounds great!
|
93ex chp
Member # 9016
|
posted
Thread is worthless with out a video quote: Originally posted by 02mustang5.4: I found the culprit it was my error turned out I put in all the coil packs in without the spring the connects the coil pack to the actual spark plug lol thanks for all the Intel guys she fired right up sounds great!
|
02mustang5.4
Member # 14004
|
posted
Idk how to post videos on here
|