|
Author
|
Topic: AED tuned, unported upper pulley only Cobra makes 497/524 STD...
|
O4COBRA
¯
Member # 10015
|
posted
 
 
Well I just got home from having my DSG 03 Cobra dyno tuned at AED here in Northern California. Today went very well with the tuning. After really fine tuning the car we made a pass and came out with 497/524 STD, 481/506 SAE on the same run. We were really happy with that pass but knew it was just a little too much with pump gas. So we de-tuned the car to 19* of timing and came up with 488/506 STD, 472/502 SAE. Couldn't be happier with the tune, and the numbers the car came up with. Anybody know how these STD #'s match up to similar modded cars or even higher modded cars?
-AED tune by Shaun
-Billetflow 2.76 upper with 100 idler - 74.5 Goodyear belt
-04SLEEPER ported and polished TB
-JLT CF RAI
-Bassani or/x and catback
-NGK TR6's
-Stock pumps, injectors, blower, MAF
[ December 13, 2010, 02:24 AM: Message edited by: O4COBRA ]
Posts: 62 | From: Sacramento | Registered: May 2010
| :
|
|
Luke87GT
Lay'n more stripes
than Caltrans
Member # 21
|
posted
472/502, impressive!
And don't get in the habit of posting none SAE numbers if you want to be taken seriously.
--------------------
Stangless
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
Pure Stang
¯
Member # 7251
|
posted
sounds sick. Cant wait to get one lol
--------------------
HEART BREAKER
R.I.P Willie Guzman (5ltrsvt) you will be missed brother.
04/24/87 - 11/23/2012
90 lx 347 RIP
86 gt
89 lx- next project
Posts: 6497 | From: San Jose | Registered: Nov 2006
| :
|
|
Egocentric
¯
Member # 9529
|
posted
Holy shit for a pretty stock cobra.
--------------------
08 G37S
72 C10 Custom
R6
quote:
ain't no one tell me what to do. - NEIGHT
Posts: 1712 | From: NoOneTellMeWhatToDo-Neight | Registered: Oct 2009
| :
|
|
|
|
East Bay 50
¯
Member # 8081
|
posted
are those "non corrected" #s?
--------------------
Kurgan tuned stroked and blown 347 foxbody. boost nukka!
Posts: 2699 | Registered: Dec 2007
| :
|
|
|
|
East Bay 50
¯
Member # 8081
|
posted
quote:
Originally posted by C6Z06s_own_50Deep:
quote:
Originally posted by East Bay 50:
are those "non corrected" #s?
his SAE numbers show corrected
reading comprehension > me. the only thing that seems kinda high is the torque. if it its really 502rwhp with a stock lower pulley thats impressive and odd at the same time lol!
--------------------
Kurgan tuned stroked and blown 347 foxbody. boost nukka!
Posts: 2699 | Registered: Dec 2007
| :
|
|
svt306snake
¯
Member # 1967
|
posted
very clean car good to meet you
--------------------
F*** TPS MOTORSPORTS F *** TPS MOTORSPORTS THEY SUCK ASS
TEAM TRUE FORGED X 2 SPONSORED
CAPITAL MUSTANG C.C.
Posts: 5841 | From: SACRAMENTO "916" YA KNOW | Registered: Oct 2002
| :
|
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
quote:
Originally posted by C6Z06s_own_50Deep:
I think 50Deep made 476/502 SAE with a 2.8 pulley...
477/504 is what mine made. I had a 2.81 pulley, single blade T/B, GT cams and high flow cats at the time. Stock fuel & MAF. Dynoed in 104 degree heat.
Your numbers look good. Most guys I see with smaller pulleys and no cats make close to what I did with my old setup. I think SVT306snake made about your numbers with his 2.76 also. You had a nice cool day and an good tuner. Congrats ![[patriot]](graemlins/patriot.gif)
[ December 12, 2010, 12:32 AM: Message edited by: 50 Deep ]
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
Luke87GT
Lay'n more stripes
than Caltrans
Member # 21
|
posted
quote:
Originally posted by 50 Deep:
quote:
Originally posted by C6Z06s_own_50Deep:
I think 50Deep made 476/502 SAE with a 2.8 pulley...
Dynoed in 104 degree heat.
That's the beauty of SAE correction factors. These details are accounted for and we have a common baseline for comparison.
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
8stang8
¯
Member # 8082
|
posted
Nice #s! What did it baseline before they tuned it?
--------------------
Fox body coupe: 347, TKO, 3.73s, 9.93 @ 143
Posts: 1279 | From: s.f. | Registered: Dec 2007
| :
|
|
O4COBRA
¯
Member # 10015
|
posted
Thanks guys for the nice words. It was definitely an exciting day for sure. We had a good time...
quote:
Originally posted by Luke87GT:
472/502, impressive!
And don't get in the habit of posting none SAE numbers if you want to be taken seriously.
Thanks. I know what you're saying, that's why I posted both numbers. So people could see what it actually made and SAE corrected. I see people all over forums posting STD numbers only. Some people like to see actual and SAE.
8stang8: No before #'s. Didn't want to risk anything with no cats and all. Afterwards though I was really curious what it would have made in stock trim...
Posts: 62 | From: Sacramento | Registered: May 2010
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
nice numbers!!! good lookin torque! my STD numbers are 598/523 if i remember correctly, SAE were 579/512 with supporting mods and older 2.4 KB @ 15psi on pump gas.
--------------------
2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
|
|
ugotsmoked
¯
Member # 6069
|
posted
Awesome Kyle.
Posts: 1585 | From: Rocklin, Ca. | Registered: Sep 2005
| :
|
|
O4COBRA
¯
Member # 10015
|
posted
quote:
Originally posted by 03SVTPower:
nice numbers!!! good lookin torque! my STD numbers are 598/523 if i remember correctly, SAE were 579/512 with supporting mods and older 2.4 KB @ 15psi on pump gas.
Good numbers. That's why I like seeing both STD and SAE. Gives you a good idea of what the car actually made, and what the SAE correction # is. Shaun's dyno right?
ugotsmoked: Thank you sir. Now we"ll have to run em' and see what the outcome is!
[ December 12, 2010, 02:52 PM: Message edited by: O4COBRA ]
Posts: 62 | From: Sacramento | Registered: May 2010
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
quote:
Originally posted by O4COBRA:
quote:
Originally posted by 03SVTPower:
nice numbers!!! good lookin torque! my STD numbers are 598/523 if i remember correctly, SAE were 579/512 with supporting mods and older 2.4 KB @ 15psi on pump gas.
Good numbers. That's why I like seeing both STD and SAE. Gives you a good idea of what the car actually made, and what the SAE correction # is. Shaun's dyno right?
ugotsmoked: Thank you sir. Now we"ll have to run em' and see what the outcome is!
yeah dyno'ed at AED by shaun
--------------------
2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
O4COBRA
¯
Member # 10015
|
posted
^ Good to know. I've got a guy on another forum telling me that Dynocom dynos read high blah blah blah, big surprise huh. So I'm trying to put numbers together to show him what the dyno has been showing with different mods...
Posts: 62 | From: Sacramento | Registered: May 2010
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by O4COBRA:
^ Good to know. I've got a guy on another forum telling me that Dynocom dynos read high blah blah blah, big surprise huh. So I'm trying to put numbers together to show him what the dyno has been showing with different mods...
Dynocom #'s can be changed anytime the operator desires.....but we don't do that at AED.
Our Dynocom is within 1/2 of 1% of a Jeff S's Dynojet 224....with the standard Dynocom calibration.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
