T O P I C R E V I E W
|
six 5.0
Member # 3153
|
posted
Wsup guys, the rims on my car are factory satin silver. They still have a nice factory clear-coat but they have YEARS & YEARS of stubborn brake dust caked in-between the spokes. This crap will come off with a wheel cleaner from an auto parts store a tooth brush and A LOT of time and elbow grease......... So my question is: Is there any tricks of the trade on getting this crap off in a timely fashion and without damaging the factory paint/clear on the rims.
Any advise will help thanks guys: :
|
NorCalRydaz
Member # 3233
|
posted
I would say go buy some rubbing compound. something that's not too fin or too corse. Something in between. Use a damp rag and apply by hand in a circle motion.
|
six 5.0
Member # 3153
|
posted
quote: Originally posted by NorCalRydaz: I would say go buy some rubbing compound. something that's not too fin or too corse. Something in between. Use a damp rag and apply by hand in a circle motion.
Tryed it... The compound works well with the leftovers. I need some thing to break the bulk of it down????
|
Chris C.
Member # 1949
|
posted
How about one of those DIY drive up car washes, use the high pressure water hose they have?
|
six 5.0
Member # 3153
|
posted
Dude I have 11/HP 4300/PSI Pressure/power washer... It steams up to 330* needless to say it doesn't do shit the brake build up
Im getting it off with a scrubber and wheel cleaner. It's taking a long time though
|
Pittsburg Mustang Owner
Member # 6100
|
posted
take em off, get some beers and a couple buddies and brush away.
Hell if you promise beer and pizza ill help you out.
|
six 5.0
Member # 3153
|
posted
quote: Originally posted by Pittsburg Mustang Owner: take em off, get some beers and a couple buddies and brush away.
Hell if you promise beer and pizza ill help you out.
LOL....... Pizza & Beer on me.
|
Platinum Detail
Member # 8026
|
posted
chris has a point the touchless car washes use hydrofloric acid to remove grim, tree sap, tar etc etc would you be able to post some pics?
|
F8LSN8K
Member # 7080
|
posted
here is some pics of some 03 cobra wheels that my boy did with some stuff that i have.
BEFORE
<br> <br> <br> <br> <br>
AFTER
[ April 08, 2009, 05:00 PM: Message edited by: F8LSN8K ]
|
Jdub07
Member # 2728
|
posted
mr clean earaser
|
six 5.0
Member # 3153
|
posted
Thats the crap im talking about x10.... What is the stuff you have??????
I tried Mr Clean Erasers.... After ALL the wheel cleaner I used, once i swiped the rim with the eraser it started to pull the paint [ April 09, 2009, 03:49 AM: Message edited by: six 5.0 ]
|
rollin5ive0
Member # 8592
|
posted
simple green if that dont work its tooth brush time, if it aint gone then 360, 600, 1000 grit sandpaper then some primer followed by your choice of rattle can spray, a nice coupla layers of clear, then turtle wax polishing compound and top it off with a nice paste wax, or skip the tired arm and powdercoat them.......
|
F8LSN8K
Member # 7080
|
posted
quote: Originally posted by six 5.0: Thats the crap im talking about x10.... What is the stuff you have??????
toilet bowl cleaner lol
|
88DroptopGT
Member # 2535
|
posted
I used this when I had painted rims. Worked great! Just mist the wheel, then spray it on, scrub and wipe off.
If it's baked on the just spray and rub more.
|
166 Merlot
Member # 1549
|
posted
try some 1200 grit sand paper then hit it with the compound the buff the shine back out. Just be easy with that sand paper on the corners, don't get carried away
|
F8LSN8K
Member # 7080
|
posted
quote: Originally posted by 88DroptopGT:
I used this when I had painted rims. Worked great! Just mist the wheel, then spray it on, scrub and wipe off.
If it's baked on the just spray and rub more.
that shit IS NOT gonna work. when brake dust get baked the fuck on the rims it is a pain in THE ass to get off even
|
uh0h50
Member # 3125
|
posted
I'd simple green it full concentrated with a tooth brush or the rough side of a dish sponge. Once you get them all cleaned up put on a couple coats of a good wax.
|
Jdub07
Member # 2728
|
posted
peanut butter and lemon juice
|
BCINGUU
Member # 2397
|
posted
quote: Originally posted by Jdub07: peanut butter and lemon juice
Say what?
|
Jdub07
Member # 2728
|
posted
hey it works for gum in your hair, why not try it LOL. If its baked on THAT bad I can't see it hurting anything
|
rollin5ive0
Member # 8592
|
posted
quote: Originally posted by uh0h50: I'd simple green it full concentrated with a tooth brush or the rough side of a dish sponge. Once you get them all cleaned up put on a couple coats of a good wax.
+1 im tellin ya simple green is shit
|