T O P I C R E V I E W
|
NiftyWhiteFifty
Member # 4320
|
posted
Did you notice any "clunking" noise after the install? i've heard that some noise is normal because of the solid cc plates. i just had the cc plates installed and this clunking noise is annoying the crap out of me now!
|
blind
Member # 3052
|
posted
did you use all 3 spacers on each c/c plate on the strut?
otherwise if you dont have a spacer on top of the c/c bearing the nut on the strut will bottom out before the strut is fully tightened up and it will clunk
|
NiftyWhiteFifty
Member # 4320
|
posted
I dont know. had a shop install them for me. thanks for the info, i'll check it out!
|
02GeeTee
Member # 5905
|
posted
quote: Originally posted by NiftyWhiteFifty: I dont know. had a shop install them for me. thanks for the info, i'll check it out!
uh0h..
|
Luke87GT
Member # 21
|
posted
Did you do anything else besides the CC plates.
When I first got my CC plates installed I thought I was experiencing the same thing as you. It was actually the rim grinding on the front control arm due to me needing steering rack limiters (I lowered the car at the same time and installed larger rims)
|
NiftyWhiteFifty
Member # 4320
|
posted
quote: Originally posted by Luke87GT: Did you do anything else besides the CC plates.
When I first got my CC plates installed I thought I was experiencing the same thing as you. It was actually the rim grinding on the front control arm due to me needing steering rack limiters (I lowered the car at the same time and installed larger rims)
No. the only thing they did was install the cc plates.
|
hidnn.o.s.
Member # 1219
|
posted
I just had a set of CC plates installed on an 01GT. I have a clunk in the drivers side when you go over uneven roads. Sounds like it's popping up and down. Everything is tight, and double checked by two seperate board members'. John thinks I have a defective plate.
|
NiftyWhiteFifty
Member # 4320
|
posted
quote: Originally posted by hidnn.o.s.: I just had a set of CC plates installed on an 01GT. I have a clunk in the drivers side when you go over uneven roads. Sounds like it's popping up and down. Everything is tight, and double checked by two seperate board members'. John thinks I have a defective plate.
Hmm. mine is doing it on both sides. passenger side more though.
|
hidnn.o.s.
Member # 1219
|
posted
Same kind of noise? Mine is perfect over "perfectly" smooth roads but shit over bumps, small pot holes etc.
|
93PONY
Member # 60
|
posted
Sometimes the spherical bearing can work loose in the C/C plate housing & shift up & down. Maximum will warranty an such issue. To test if this is the problem you can jack up the wheel off the ground & pull up/down on the wheel to see if there's any movment in the C/C plate.
|
NiftyWhiteFifty
Member # 4320
|
posted
quote: Originally posted by hidnn.o.s.: Same kind of noise? Mine is perfect over "perfectly" smooth roads but shit over bumps, small pot holes etc.
Yep. same thing here.
|
hidnn.o.s.
Member # 1219
|
posted
Can you do me a favor please? Let me know when you find the "fix" and I'll do the same if I find it first.
Thanks,
Don
Thank you for the suggestion Sean, I'll give it a shot ![[patriot]](graemlins/patriot.gif) [ January 16, 2006, 12:14 AM: Message edited by: hidnn.o.s. ]
|
NiftyWhiteFifty
Member # 4320
|
posted
quote: Originally posted by hidnn.o.s.: Can you do me a favor please? Let me know when you find the "fix" and I'll do the same if I find it first.
Thanks,
Don
Thank you for the suggestion Sean, I'll give it a shot
Sure thing Don
I'll try Sean's suggestion too. [ January 16, 2006, 12:25 AM: Message edited by: NiftyWhiteFifty ]
|
1Sicgt
Member # 714
|
posted
Ya, truely if the spherical is not damaged, then the plate itself should not be the problem.
Things I would check.
Make sure the underside plate is flush against the top of the strut tower, check all bolts and hardware. check for shock shaft play inside of the spherical. Possibly wrong bearing size. Check for correct amount of spacers again.
|
9Roush8
Member # 2472
|
posted
My car makes a popping sound or a thud on the drivers side as well....hmmm, I have mm plates too. I was thinking maybe a blown strut but maybe i should look elsewhere.
|
1FAST89GT
Member # 5071
|
posted
i have no issues with mine they r great!
|
TrueBlue
Member # 1063
|
posted
quote: Originally posted by 93PONY: Sometimes the spherical bearing can work loose in the C/C plate housing & shift up & down. Maximum will warranty an such issue. To test if this is the problem you can jack up the wheel off the ground & pull up/down on the wheel to see if there's any movment in the C/C plate.
Yep, that happened to mine, had them replaced under warranty!..
|