T O P I C R E V I E W
|
66_5.0
Member # 9974
|
posted
Can someone point me in the right direction of do's and dont's for the process of detailing a car.
Ive been reading up on it but would like some personal feedback/tips. Thanks CaFords [ September 24, 2012, 08:20 PM: Message edited by: 66_5.0 ]
|
1ST0KGT
Member # 10606
|
posted
don't get shitty material, a good buffer, depending on how bad is your paint determines the RPMz of your buffer, do the car piece by piece. DONT BE LAZY!
|
JUNKYARD5.0
Member # 10398
|
posted
It's a pretty broad subject depending on what kind of detail you're looking to but as far as a complete detail for the first time I would go,
1. Wash car and wheels 2.Clay bar the whole car to remove oxidation and etc. 3. Polish the car with a rubbing compound using buffer just try to go even and let the machine move go by itself without pressing too hard unless it needs to be buffed out. Then remove the rubbing compound. 4. Apply a wax of your choice, and use a small brush to go around the car to remove any excess wax or rubbing compound. 5. Clean the windows with solution of your choice (no windex), and clean the wheels with a rag and add tire shine.
If you're looking for interior you're going to need other things.
|
66_5.0
Member # 9974
|
posted
My paint isn't even a year old but some of this water is brutal.
Junkyard, about how long should it take if done right? And do you have to knead the claybar frequently?
|
50Reasons
Member # 6452
|
posted
Just do a good wash and then a good hand wax your paint is new so I wouldn't worry about using clay bars and a power buffers
|
JUNKYARD5.0
Member # 10398
|
posted
quote: Originally posted by 66_5.0: My paint isn't even a year old but some of this water is brutal.
Junkyard, about how long should it take if done right? And do you have to knead the claybar frequently?
It really depends on the condition of the car, but it can be done in like 2hrs to a whole day job if there's a lot of details, don't worry about time too much just make sure you do a good job on each section.
Try working in a pattern, like for example, do half a side of the car first starting from the drivers side, do half of the hood, bumper and all the driver side roof, doors, fenders, trunk, and then do the other half on the passenger side. Work from the front number to the trunk just to keep track and work in small sections so that if you see anything wrong you can fix it or stop.
You can knead the clay bar as often as you like but it;s not necessary to over do it, use your judgement depending on the condition of the car. You can use the same clay bar like 4-5 times, if you notice anything get stuck to the clay you can throw that part away.
|
fstryde3
Member # 8436
|
posted
As previously stated
Wash- Don't use dish soap Clay- Knead the clay and keep the panel you're working on lubricated, the clay shouldn't stick Polish- Pain in the butt but worth it Wax- I use Meguiar's Products Cause I like em Upkeep- I use a California duster and Detailer often
Takes me about 6 hours to get the car where I want it but I do everything by hand with OTC Meguiar's products. It's a hobby for me plus a few hours in the garage listening to music drinking beer and detailing is way better then being inside listening to the old lady talk about curtains.
Did this to my truck recently,
[ September 24, 2012, 03:00 PM: Message edited by: fstryde3 ]
|
66_5.0
Member # 9974
|
posted
Fstryde that looks good man. Paint is good but I just want to see it its worth it to do it even tho its only a few months old
I was thinking Mothers products btw
|
fstryde3
Member # 8436
|
posted
quote: Originally posted by 66_5.0: Fstryde that looks good man. Paint is good but I just want to see it its worth it to do it even tho its only a few months old
I was thinking Mothers products btw
Thanks man I appreciate it I detail the friends and families cars for fun LOL In my opinion I would say yes do it, you will be amazed how much crap the clay bar takes off even on a newly painted vehicle plus you get to stand back and look at your work. And as far as Mother's I've heard good things just always roll with Meguiar's cause that's what my pops always used. [ September 24, 2012, 04:56 PM: Message edited by: fstryde3 ]
|
BLK35th
Member # 4685
|
posted
Everything you need to know is here:
http://www.moddedmustangs.com/forums/general-car-care-detailing/
|
Nifty50
Member # 9987
|
posted
dont forget to use that Armor All for them tires!!! Nothing worse than a clean car with sun burnt tires.
|
hidnn.o.s.
Member # 1219
|
posted
If you don't clay a car before you wax it you'd be AMAZED just how much shit you are sealing in with the wax... Wash WITH dish soap prior to your detail (never after the detail is complete because it will brake everything down that you're building up protection wise.) If you have to, go over it two or three times wash wise because everything you get off with this stage makes the other stages that much easier.
Then on to the clay bar phase. Take your time with every little spot. You'll be able to go back and forth over the tiniest marks and they will eventually lighten with each swipe and eventually come off.
Then the polish stage, make sure you use microfiber towels and switch areas on the towels often. Same thing, you'll find certain makes that will lighten and come off as you go over them. Slow and steady.
Then wax it to seal it
Upkeep will be easy, don't plan to use much soap, in the bucket because you won't need much. Water more or less. Soap wise, get some car wash soap and again, stay away from dishwash soap until just before you do this process again. Comes out looking incredible, but it is a lot of work. Generally 8 hours and I prefer to do it ALL by hand.
|
66_5.0
Member # 9974
|
posted
quote: Originally posted by hidnn.o.s.: If you don't clay a car before you wax it you'd be AMAZED just how much shit you are sealing in with the wax... Wash WITH dish soap prior to your detail (never after the detail is complete because it will brake everything down that you're building up protection wise.) If you have to, go over it two or three times wash wise because everything you get off with this stage makes the other stages that much easier.
Then on to the clay bar phase. Take your time with every little spot. You'll be able to go back and forth over the tiniest marks and they will eventually lighten with each swipe and eventually come off.
Then the polish stage, make sure you use microfiber towels and switch areas on the towels often. Same thing, you'll find certain makes that will lighten and come off as you go over them. Slow and steady.
Then wax it to seal it
Upkeep will be easy, don't plan to use much soap, in the bucket because you won't need much. Water more or less. Soap wise, get some car wash soap and again, stay away from dishwash soap until just before you do this process again. Comes out looking incredible, but it is a lot of work. Generally 8 hours and I prefer to do it ALL by hand.
Ok thanks for the advice. But why dish wash soap? Can't a polish compound do the same?
Im real hesitant on that since this is the first car Ive had with nice paint lol. Im planning on doing it this weekend. [ September 24, 2012, 07:39 PM: Message edited by: 66_5.0 ]
|
66_5.0
Member # 9974
|
posted
quote: Originally posted by Nifty50: dont forget to use that Armor All for them tires!!! Nothing worse than a clean car with sun burnt tires.
Oh they're always armor alled!
Thanks Blk35th will check that out
|
Nifty50
Member # 9987
|
posted
quote: Originally posted by 66_5.0: quote: Originally posted by Nifty50: dont forget to use that Armor All for them tires!!! Nothing worse than a clean car with sun burnt tires.
Oh they're always armor alled!
Thanks Blk35th will check that out
Right on Man, stay shinnin
|
BLK35th
Member # 4685
|
posted
quote: Originally posted by 66_5.0: quote: Originally posted by Nifty50: dont forget to use that Armor All for them tires!!! Nothing worse than a clean car with sun burnt tires.
Oh they're always armor alled!
Thanks Blk35th will check that out
Good Luck, I have been meaning to get started on the clay bar deal too. But keep procrastinating, I just don't have much patience for things like that. Good luck though.
Other than that, the website is very helpful.
|
66_5.0
Member # 9974
|
posted
It is Ive been looking at it and Im excited. Looks like some beers and tunes to add to the list [ September 24, 2012, 09:55 PM: Message edited by: 66_5.0 ]
|
NINETY#FIFTY
Member # 4866
|
posted
What products do you guys suggest to get swirls out of stock black paint?
|
BLK35th
Member # 4685
|
posted
I would really like to know the answer to this as well. I used Turtle wax rubbing compound, McGuire wax and Nu finish polish. And there's still some swirl marks. [ September 26, 2012, 12:21 AM: Message edited by: BLK35th ]
|
BLK35th
Member # 4685
|
posted
quote: Originally posted by NINETY#FIFTY: What products do you guys suggest to get swirls out of stock black paint?
Schlage, and Geico lol
|