T O P I C R E V I E W
|
90gtvert
Member # 8697
|
posted
Hey Guys,
What do you think this combo will roughtly make
306 mid 8ish compression F Cam Forged Dish pistons Stock Heads/Intake 70MM TB 75MM MAF 42lbs injectors Master Power T70 Turbo at 14lbs of boost Anderson PMS with full tune on 91octane
Curious....
Mike
|
gtowned
Member # 8156
|
posted
being that youre gonna using stock heads and intake its gonna be really hard to guess.the heads and intake are gonna choke the shit out of that setup.if you put some good flowing heads and intake im pretty sure you would be in block splitting country but with that setup i dont know
|
90gtvert
Member # 8697
|
posted
Oh I know, Im building a Dart Windsor stroker at the moment, but while building that one im gonna see if I can go 10's with stock heads and intake
Mike
|
GOT 50
Member # 1960
|
posted
400+- to the wheels. 500 RWTQ
|
00NIGHTMARE
Member # 1010
|
posted
I'm gonna guess around 0hp/0tq if I help with the install.
|
90gtvert
Member # 8697
|
posted
quote: Originally posted by 00NIGHTMARE: I'm gonna guess around 0hp/0tq if I help with the install.
Lol you can stand around and hand me tools while Nala jumps the shit outta your leg
|
JohnB
Member # 969
|
posted
Seeing you will only be able to get around 19* of timing in it with 91 octane before detonation beats the hell out of it, I'd guess around 380hp/410tq.
|
SheerSliver03
Member # 6589
|
posted
4,000 hp on 87
4,250 hp on corn
|
GOT 50
Member # 1960
|
posted
get heads and intake.
I made with my B7G turbo kit 499 525 at 14lbs.
|
90gtvert
Member # 8697
|
posted
Refer to my first post lol
Building another motor, so just gonna see how fast I can go on this one until my new motor is done.
Maybe Ill just tune it on 110 and 91 and use the adjustable boost controller and switch
|
SmokinLX
Member # 1684
|
posted
I would put some new valve spring's on it so You can make power above 5000 rpm "valve float" and with a 1.6 - 1.7 60 ft time You might just accomplish Your 10 sec goal !!
|
turbo50
Member # 6700
|
posted
I know of one with 60lbs that made 420 to the wheels, hence turbogt
|
turbo50
Member # 6700
|
posted
quote: Originally posted by turbo50: I know of one with 60lbs that made 420 to the wheels, hence turbogt
Here you go.
http://www.turbomustangs.com/smf/index.php?topic=41851.0
|
90gtvert
Member # 8697
|
posted
Nice and that was with a stock cam
|