|
Author
|
Topic: 04 cobra won't go in revers and some times in 1st gear
|
19and1/2
¯
Member # 8353
|
posted
 
 
04 cobra we replace the flywheel, clutch ,pressure plate, cable and shift fork it drove fine like for 50 miles and then the same problem again any ideas ? Thanks cafords
--------------------
95gt
Posts: 329 | From: San Pablo | Registered: Apr 2008
| :
|
|
SLOWSN95
¯
Member # 8269
|
posted
If you haven't replaced the quadrant and are still running stock cable, with the car off and in 1st gear, pull clutch pedal up until it snaps/pops, and then push the pedal in. That will adjust the clutch
--------------------
94' GT
347 Stroker
MM Suspended
2003 SB SVT Lightning
Pullied and Lowered
89'Hatch-SOLD
Posts: 2214 | From: 510/east bay | Registered: Mar 2008
| :
|
|
Tom Renzo
¯
Member # 13165
|
posted
The Quadrant might be stripped and needs replacing. The teeth have a nasty habit of doing that then the clutch goes out of adjustment and wont release with the pedal down.
--------------------
I spend money i don't have. Building cars i don't need. To impress people i don't know.
Posts: 557 | From: CT | Registered: Sep 2013
| :
|
|
vortek01gt
¯
Member # 10149
|
posted
does it grind when you try and put in gear or is it just really hard? And how does the clutch feel in the other gears? does it catch right off the floor or does it seem ok?
--------------------
2001 GT s-trim h/c t56 AED tuned
456hp 415ftlb 10psi-street
478hp 427ftlb 12psi-race
11.26@121mph 1.57 60ft-street
10.81@126mph 1.56 60ft-race
Posts: 622 | From: martinez CA | Registered: Jul 2010
| :
|
|
19and1/2
¯
Member # 8353
|
posted
^ it just hard to go into the gear
--------------------
95gt
Posts: 329 | From: San Pablo | Registered: Apr 2008
| :
|
|
MaK_1967v8
¯
Member # 12187
|
posted
Do you have a short shifter? If the stopper bolt isn't adjusted correctly, it wont allow it into gear.
--------------------
1967 C Code Coupe
2004 Roush Stage 2
Posts: 620 | From: Sacramento, CA | Registered: Jul 2012
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by SLOWSN95:
If you haven't replaced the quadrant and are still running stock cable, with the car off and in 1st gear, pull clutch pedal up until it snaps/pops, and then push the pedal in. That will adjust the clutch
+1
clutch cable isn't adjusted properly.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
