T O P I C R E V I E W
|
19and1/2
Member # 8353
|
posted
04 cobra we replace the flywheel, clutch ,pressure plate, cable and shift fork it drove fine like for 50 miles and then the same problem again any ideas ? Thanks cafords
|
SLOWSN95
Member # 8269
|
posted
If you haven't replaced the quadrant and are still running stock cable, with the car off and in 1st gear, pull clutch pedal up until it snaps/pops, and then push the pedal in. That will adjust the clutch
|
Tom Renzo
Member # 13165
|
posted
The Quadrant might be stripped and needs replacing. The teeth have a nasty habit of doing that then the clutch goes out of adjustment and wont release with the pedal down.
|
vortek01gt
Member # 10149
|
posted
does it grind when you try and put in gear or is it just really hard? And how does the clutch feel in the other gears? does it catch right off the floor or does it seem ok?
|
19and1/2
Member # 8353
|
posted
^ it just hard to go into the gear
|
MaK_1967v8
Member # 12187
|
posted
Do you have a short shifter? If the stopper bolt isn't adjusted correctly, it wont allow it into gear.
|
Blind
Member # 3052
|
posted
quote: Originally posted by SLOWSN95: If you haven't replaced the quadrant and are still running stock cable, with the car off and in 1st gear, pull clutch pedal up until it snaps/pops, and then push the pedal in. That will adjust the clutch
+1
clutch cable isn't adjusted properly.
|