T O P I C R E V I E W
|
510Notch
Member # 9353
|
posted
im using 31 spline axles that are larger diameter then the factory 28 spline.
what axle seals do I use for my factory 8.8 housing (90 mustang)
Yukon Axle part# - YA F750011
....google was not my friend on this one
thanks [ 2017-05-08, 01:34 PM: Message edited by: 510Notch ]
|
NEIGHT
Member # 8741
|
posted
Edit: Sorry I read the question wrong. [ 2017-05-08, 01:53 PM: Message edited by: NEIGHT ]
|
4IDFOX
Member # 9921
|
posted
More importantly. What bearings are you going to use ? I bet stock will be what you need.
|
RRRCobraSC281
Member # 7086
|
posted
I believe the axle seals and bearings are the same, since the diameter of the shaft where the bearing rides on is the same
|
ford521
Member # 14321
|
posted
Yes the bearings and seals are specific to the 31 spline ...just did them in a 2013 GT500. Have your parts guy look them up for that vehicle...I got mine from Ford dealer
|
NEIGHT
Member # 8741
|
posted
This is all I could find, hope it helps.
https://www.yukongear.com/partslist.aspx?SearchMode=Diff&TypeID=4&Type=Ford&DiffID=276&DiffName=Ford+8.8%22+-+31+Spline&CatID=159&CatName=Axle+Seals+-+Rear
|