T O P I C R E V I E W
|
V3T HNTR
Member # 11618
|
posted
So I'm cruising and all of a sudden this LOUD clinking metal noise...I have a video for you guys to listen. Most recent work done was new flywheel and clutch. Clutch has 340 miles on it....
http://s587.photobucket.com/user/lopezckm02/media/DJ%20Gear/FBAFFD90-469F-4277-9D32-07DBB4744154_zps9gbayvxx.mp4.html
|
89bluenotch
Member # 7454
|
posted
Hard to tell from the video. Does it come from a specific side? I would pop off the valve covers and take a look.
|
V3T HNTR
Member # 11618
|
posted
Negative, kind of comes from all sides honestly. Hard to tell. I have a feeling it's related somehow to flywheel/starter. It literally sounds like a metal bolt just getting tossed around inside the tranny...
|
V3T HNTR
Member # 11618
|
posted
Thanks for the feedback though bluenotch
|
naked5.0notch
Member # 14058
|
posted
When the flywheel was replaced was loc tite used on the fly wheel bolts ? Did all of the bolts on the flywheel and pressure plates get torqued to spec ?
|
V3T HNTR
Member # 11618
|
posted
Took the car to a shop for the clutch and flywheel work, taking it back this morning. Will keep this thread posted with updates.
|
naked5.0notch
Member # 14058
|
posted
oh ok cool, hopefully its not too serious
|
70stang351w
Member # 9948
|
posted
Any update?
|
V3T HNTR
Member # 11618
|
posted
Ignore the typos, here's the word I just received.
We took off the Intake 2 injectors are dropping way too much fuel so it's creating a misfire in two cylinders all of I don't see anything loose in there the cars gonna have to go back to the place that tinned it for you to see why there's an open loop on the injectors or try to retune again
|
V3T HNTR
Member # 11618
|
posted
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/C91E215B-2AB7-4EEB-88D2-B2AAE2F2CE8F_zpswtydukg7.jpg
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/8A41783B-DBEE-421C-8CEC-03BB95F9373B_zpscjt82bqs.jpg
http://i587.photobucket.com/albums/ss311/lopezckm02/DJ%20Gear/D770015C-A3C8-485D-961C-2EA9D1BCC027_zpsz0hrvfl1.jpg [ 2017-04-29, 05:26 PM: Message edited by: V3T HNTR ]
|
Martinna
Member # 12493
|
posted
Take a long rubber hose, like a few feet of an old garden hose or heater hose and put one end to your ear. Place the other end by places where you think the noise is coming from.
|
V3T HNTR
Member # 11618
|
posted
Wanted to update this thread, the problem was the stud that hold the roller rocker broke causing the loud pinging. Little metal piece being thrown around. Nothing else was damaged. Replaced all studs with new ARP and good to go!
|
70stang351w
Member # 9948
|
posted
thats good was wondering what ever happened
|