T O P I C R E V I E W
|
Built88LX
Member # 10758
|
posted
I have a 2000 mustang gt and I was simply swapping out my taillights to a different set and now my brake lights or turn signals won't work everything was fully functional before does anyone know what would cause this not sure if it makes a difference but I have the raxiom plug n play turn signal brake light kit from American muscle
|
1fastmach1
Member # 10137
|
posted
sounds like a burnt fuse
|
Built88LX
Member # 10758
|
posted
I have checked a bunch of fuses only one I found burnt was #1 under dash it says that's for the cigarette lighter do you know which other fuses could possible cause these symptoms [ 2016-11-15, 04:48 PM: Message edited by: Built88LX ]
|
ford521
Member # 14321
|
posted
are the new taillites LEDs , the raxiom will not work with them...
|
Built88LX
Member # 10758
|
posted
quote: Originally posted by ford521: are the new taillites LEDs , the raxiom will not work with them...
No they are just factory lights and bulbs that were professionally tinted by a body shop here in town
|
ford521
Member # 14321
|
posted
ok. Will the lights work without the raxiom box spliced in, maybe its a bad box?
|
Built88LX
Member # 10758
|
posted
quote: Originally posted by ford521: ok. Will the lights work without the raxiom box spliced in, maybe its a bad box?
Not sure I don't have a factory tail light harness to swap out I bought the car with the sequential kit already installed
|
93 5.0
Member # 12418
|
posted
replace the fuse and see if that helps I had mine do the same on my Honda and had a pop fuse that wasn't for the brakes and replace it and they started working fine just a idea
|
Stangn5oh
Member # 10875
|
posted
Play around with the bulbs... Flip the bulb 180 degrees in the connector... That worked for my LED tail lights years ago.
|